Drvna industrija, Vol. 75 No. 2, 2024.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2024.0134
Some Physical and Mechanical Characteristics of Waste Olive Oil Heat-Treated Oriental Beech Wood
Caglar Altay
; aydin adnan menderes university, Aydin, Turkey
Mehmet Ali Kapçak
; Mugla Sıtkı Kocman University, Muğla, Turkey
Hilmi Toker
; Muğla Sıtkı Koçman University, MUĞLA, Turkey
Emir Özdemi̇r
; Muğla Sıtkı Koçma University, MUĞLA, Turkey
Ergun Baysal
; Mugla Sitki Kocman University, , Turkey
Sažetak
This study set out to look into some of the mechanical and physical characteristics of oil-heated oriental beech wood. Waste olive oil was used for oil-heat treatment. Heat treatment of the oil was done at 200 °C and 230 °C for 2 hours and 4 hours, respectively. After oil-heat treatment, physical traits including oven-dry density and water absorption levels, as well as mechanical traits like compression strength parallel to the grain (CSPG), were determined. Oven dry density of wood increased significantly after being heated in oil. Compared to the control groups, waste olive oil heat-treated (WOHT) oriental beech showed lower levels of water absorption. At 200 °C for 4 h, CSPG of waste olive oil heat-treated wood were at their highest, and then they steadily fell as the temperature and treatment time rose.
Ključne riječi
waste oil heat-treatment; physical properties; mechanical properties; waste olive oil; oriental beech
Hrčak ID:
317886
URI
Datum izdavanja:
15.6.2024.
Posjeta: 133 *