Metalurgija, Vol. 48 No. 4, 2009.
Izvorni znanstveni članak
Working steel P2-04BCH by equal channel angular extrusion (ECAE)
M. Greger
; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
V. Vodárek
; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
L. Kander
; Material & Metallurgical Research Ltd, Ostrava, Czech Republic
M. Černý
; Faculty of Metallurgy and Materials Engineering, VŠB-TU Ostrava, Czech Republic
Sažetak
The article presents results of investigation of structure and properties of low-carbon steel grade P2-04BCH after application of ECAE at temperature of approx. 290C. The ECAE method leads to significant improvement of strength of investigated material. Investigation of structure was made by combination of TEM and FEG SEM together with EBSD. It was proven the ECAE method enables obtaining of ultra fine-grained ferritic structure formed by recrystallised grains with very low density of dislocations and with a small portion of spheroidised carbides, which occurred usually on the boundaries of ferritic grains.
Ključne riječi
nanomaterials; low-carbon steel; ECAE deformation; EBSD
Hrčak ID:
38694
URI
Datum izdavanja:
1.10.2009.
Posjeta: 1.356 *