Izvorni znanstveni članak

https://doi.org/10.21278/TOF.40205

Influence of Tip Relief Profile Modification on Involute Spur Gear Stress

Kristina Marković ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
Željko Vrcan orcid.org/0000-0002-7005-4130 ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia

Sažetak

This paper deals with the effects of linear tip profile modification on the stress of tooth root and tooth flank of involute spur gears. An increase in the tooth flank stress due to the tip profile modification is potentially hazardous because there is an increased risk of micro pitting initiation. The required magnitude of tip relief profile modification depends on the magnitude of tooth elastic deformation that needs to be compensated for. In order to study the effects of linear tip profile modification on gear stress, two matching finite element models of involute spur gear pairs have been created, and tip relief profile modification has been applied to one pair. Tooth root and tooth flank stresses in both gear pairs have been compared in order to establish the effect of tip relief profile modification on gear stress.

Ključne riječi

involute spur gears; profile modification; tip relief; finite element method; tooth root stress; tooth flank stress

Hrčak ID:

161992

URI

https://hrcak.srce.hr/161992

Datum izdavanja:

18.7.2016.

Posjeta: 4.940 *