Izvorni znanstveni članak
https://doi.org/10.15177/seefor.18-13
Valorisation of Waste Wood Biomass as Biosorbent for the Removal of Synthetic Dye Methylene Blue from Aqueous Solutions
Natalija Velić
orcid.org/0000-0002-5620-506X
; Josip Juraj Strossmayer University of Osijek, Faculty of Food Technology Osijek, Franje Kuhača 20, HR-31000 Osijek, Croatia
Marija Stjepanović
orcid.org/0000-0002-1600-6971
; Josip Juraj Strossmayer University of Osijek, Faculty of Food Technology Osijek, Franje Kuhača 20, HR-31000 Osijek, Croatia
Lidija Begović
orcid.org/0000-0002-3674-6686
; Josip Juraj Strossmayer University of Osijek, Department of Biology, Cara Hadrijana 8/A, HR-31000 Osijek, Croatia
Mirna Habuda-Stanić
orcid.org/0000-0002-0089-9488
; Josip Juraj Strossmayer University of Osijek, Faculty of Food Technology Osijek, Franje Kuhača 20, HR-31000 Osijek, Croatia
Darko Velić
orcid.org/0000-0002-3888-998X
; Josip Juraj Strossmayer University of Osijek, Faculty of Food Technology Osijek, Franje Kuhača 20, HR-31000 Osijek, Croatia
Tamara Jakovljević
; Croatian Forest Research Institute, Division for Forest Ecology, Cvjetno naselje 41, HR-10450 Jastrebarsko, Croatia
Sažetak
Background and Purpose: Wood and wood processing industries are generators of a substantial amount of waste wood biomass, such as wood chips, shavings and sawdust. Such waste is often unused and its disposal can be a serious environmental problem. Different lignocellulosic waste materials have been successfully used as low-cost adsorbents (biosorbents) for the removal of synthetic dyes, as well as other contaminants, from wastewater. The aim of this study was to valorise the waste wood biomass of ten tree species, out of which seven are the most represented species of the Croatian growing stock, as biosorbents for the removal of synthetic dye methylene blue (MB) from model solutions.
Materials and Methods: The waste wood biomasses (shavings or sawdust) of ten tree species, namely common beech, pedunculate oak, sessile oak, common hornbeam, narrow-leafed ash, poplar, European silver fir, Norway spruce, European larch and Douglas fir, were dried and milled prior to characterisation and adsorption experiments. Characterisation of the biosorbents was performed by chemical analysis and Fourier transform Fourier transform infrared spectroscopy (FTIR). Upon characterisation, batch adsorption experiments were conducted in order to survey waste wood biomass as potential adsorbents for the removal of synthetic dye MB. The colour removal was monitored spectrophotometrically at predetermined time intervals. Further adsorption experiments were performed using poplar sawdust. The effects of contact time, biosorbent concentration, initial dye concentration, and pH on the adsorption process were investigated. The experimental data obtained by batch adsorption experiments were analysed using adsorption isotherm models (Freundlich and Langmuir).
Results: All the tested biosorbents were found to be very effective for the removal of MB from model dye solution, achieving high removal percentages ranging from 93.25 to 98.50%. Poplar sawdust proved to be the most effective. It was shown that MB adsorption process onto poplar sawdust could be interpreted in terms of Langmuir and Freundlich adsorption isotherm models.
Conclusions: Taken together, these results suggest that waste wood biomass has the potential to be used as a low-cost biosorbent for MB removal from aqueous solutions.
Ključne riječi
adsorption; dye removal; Methylene Blue; poplar sawdust; waste wood biomass
Hrčak ID:
214128
URI
Datum izdavanja:
22.12.2018.
Posjeta: 1.806 *