Prethodno priopćenje

https://doi.org/10.31803/tg-20220329135150

Development of a Test System to Make Circularity Measurements of Rubber Bushing After Stress Relief

Muhammed Abdullah Ozel orcid.org/0000-0003-3056-6438 ; AYD Automotive Industry Konya, Vali İhsan Dede Cd. No: 7, 42280 Büyükkayacık Osb/Selçuklu/Konya, Turkey
Selim Sefa Baysal orcid.org/0000-0002-7439-4087 ; AYD Automotive Industry Konya, Vali İhsan Dede Cd. No: 7, 42280 Büyükkayacık Osb/Selçuklu/Konya, Turkey
Cemil Sungur ; Konya Technical University, Faculty of Engineering and Natural Sciences Electrical Electronics Engineering, Akademi Neighborhood Yeni İstanbul Road No: 235/1, Selçuklu/Konya, Turkey

Sažetak

Rubber metal bushings are one of the most important parts of the suspension system. These parts are specially designed to minimize the vibrations and noises that vehicles are exposed to while driving. In this study, it is aimed to measure the circularity of rubber metal bushings after stress relief. A modular design is provided according to the tolerance values of the bushings in the inventory. Simultaneously with deep learning and image processing algorithms, laser circularity measurements are verified with reference to bush circularity and deformation points are determined. The detected deformation is transferred to the HMI screen. With this study, it was ensured that the circularity errors in the rubber metal bushings were taken under control and the problems that may be encountered after the production were eliminated, a more sensitive solution was provided, and a quality production and accurate results were obtained.

Ključne riječi

bushing; circularity; deep learning; image processing; quality control

Hrčak ID:

283801

URI

https://hrcak.srce.hr/283801

Datum izdavanja:

23.9.2022.

Posjeta: 1.051 *