Tehnički vjesnik, Vol. 17 No. 4, 2010.
Izvorni znanstveni članak
Increasing accuracy of temperature measurement based on adaptive algorithm for microcontroller transmitter
Ljubivoj Cvitaš
; Department of Electrical Engineering, Polytechnic of Zagreb, Konavoska 2, HR-10000 Zagreb, Croatia
Željko Hocenski
; Faculty of Electrical Engineering, University J. J. Strossmayer in Osijek, Kneza Trpimira 2B, HR-31000 Osijek, Croatia
Sažetak
The article compares the most common methods for converting measured resistance of platinum sensor to a temperature value in relation to the new adaptive algorithm applied in a compact temperature transmitter. The hardware of the temperature transducer is based on a microcontroller with input/output circuits that generate an output signal proportional to the measured temperature. The compact temperature transmitter has size constraints because it is required to be installed in the head of an industrial thermometer. The microcontroller is limited by the available power supply and memory resources. The platinum temperature sensors should conform to industry standards and fit a mathematical curve known as the Callendar-Van Dusen equation with nominal values of constants A, B and C. The increase in the total accuracy of temperature measurement is possible by matching the sensor characteristics with the connected temperature transducer. After calibration of the platinum sensor, corresponding new constants are calculated and written into the temperature transmitter. The presented new software method enables the use of the Callendar-Van Dusen constants retaining or even increasing the accuracy of the resistance to temperature conversion.
Ključne riječi
adaptive algorithm; microcontroller; sensor; temperature measuring; temperature transmitter
Hrčak ID:
62919
URI
Datum izdavanja:
31.12.2010.
Posjeta: 3.945 *