hrcak mascot   Srce   HID

Izvorni znanstveni članak

Microstructural evolution during friction stir welding of AlSi1MgMn alloy

M. Janjić ; Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro
M. Vukčević ; Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro
V. Mandić ; Mechanical Engineering Faculty, University of Kragujevac, Kragujevac, Republic of Serbia
D. Pavletić ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
N. Šibalić ; Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro

Puni tekst: engleski, pdf (512 KB) str. 29-33 preuzimanja: 708* citiraj
APA 6th Edition
Janjić, M., Vukčević, M., Mandić, V., Pavletić, D. i Šibalić, N. (2012). Microstructural evolution during friction stir welding of AlSi1MgMn alloy. Metalurgija, 51 (1), 29-33. Preuzeto s https://hrcak.srce.hr/71167
MLA 8th Edition
Janjić, M., et al. "Microstructural evolution during friction stir welding of AlSi1MgMn alloy." Metalurgija, vol. 51, br. 1, 2012, str. 29-33. https://hrcak.srce.hr/71167. Citirano 30.11.2020.
Chicago 17th Edition
Janjić, M., M. Vukčević, V. Mandić, D. Pavletić i N. Šibalić. "Microstructural evolution during friction stir welding of AlSi1MgMn alloy." Metalurgija 51, br. 1 (2012): 29-33. https://hrcak.srce.hr/71167
Harvard
Janjić, M., et al. (2012). 'Microstructural evolution during friction stir welding of AlSi1MgMn alloy', Metalurgija, 51(1), str. 29-33. Preuzeto s: https://hrcak.srce.hr/71167 (Datum pristupa: 30.11.2020.)
Vancouver
Janjić M, Vukčević M, Mandić V, Pavletić D, Šibalić N. Microstructural evolution during friction stir welding of AlSi1MgMn alloy. Metalurgija [Internet]. 2012 [pristupljeno 30.11.2020.];51(1):29-33. Dostupno na: https://hrcak.srce.hr/71167
IEEE
M. Janjić, M. Vukčević, V. Mandić, D. Pavletić i N. Šibalić, "Microstructural evolution during friction stir welding of AlSi1MgMn alloy", Metalurgija, vol.51, br. 1, str. 29-33, 2012. [Online]. Dostupno na: https://hrcak.srce.hr/71167. [Citirano: 30.11.2020.]

Sažetak
This paper provides the research of the influence of geometric and kinematic parameters on the microstructure and mechanical properties of welded joint of aluminum alloy AlSi1MgMn (6082-T6) obtained through the Friction Stir Welding (FSW) process. The experiment parameters were welding speed, rotation speed, angle of pin slope, pin diameter and shoulder diameter. On the obtained welded workpieces the dynamic testing on the impact toughness, and determination of microstructural zones were carried out.

Ključne riječi
friction stir welding - FSW; shoulder; pin; impact toughness; microstructure

Hrčak ID: 71167

URI
https://hrcak.srce.hr/71167

[hrvatski]

Posjeta: 1.049 *