hrcak mascot   Srce   HID

Izvorni znanstveni članak

The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state

P. Kovač ; Faculty of Technical Science, University of Novi Sad, Serbia
L. Sidjanin ; Faculty of Technical Science, University of Novi Sad, Serbia
D. Rajnović ; Faculty of Technical Science, University of Novi Sad, Serbia
B. Savković ; Faculty of Technical Science, University of Novi Sad, Serbia
J. Wannasin ; Faculty of Engineering, Prince of Songkla University, Thailand

Puni tekst: engleski, pdf (420 KB) str. 34-38 preuzimanja: 746* citiraj
APA 6th Edition
Kovač, P., Sidjanin, L., Rajnović, D., Savković, B. i Wannasin, J. (2012). The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state. Metalurgija, 51 (1), 34-38. Preuzeto s https://hrcak.srce.hr/71168
MLA 8th Edition
Kovač, P., et al. "The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state." Metalurgija, vol. 51, br. 1, 2012, str. 34-38. https://hrcak.srce.hr/71168. Citirano 01.08.2021.
Chicago 17th Edition
Kovač, P., L. Sidjanin, D. Rajnović, B. Savković i J. Wannasin. "The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state." Metalurgija 51, br. 1 (2012): 34-38. https://hrcak.srce.hr/71168
Harvard
Kovač, P., et al. (2012). 'The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state', Metalurgija, 51(1), str. 34-38. Preuzeto s: https://hrcak.srce.hr/71168 (Datum pristupa: 01.08.2021.)
Vancouver
Kovač P, Sidjanin L, Rajnović D, Savković B, Wannasin J. The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state. Metalurgija [Internet]. 2012 [pristupljeno 01.08.2021.];51(1):34-38. Dostupno na: https://hrcak.srce.hr/71168
IEEE
P. Kovač, L. Sidjanin, D. Rajnović, B. Savković i J. Wannasin, "The microstructure infl uence on the chip formation process of Al-Cu alloy cast conventionally and in semi solid state", Metalurgija, vol.51, br. 1, str. 34-38, 2012. [Online]. Dostupno na: https://hrcak.srce.hr/71168. [Citirano: 01.08.2021.]

Sažetak
For many metal alloys, the process of metal cutting is accompanied by extensive plastic deformation and fracture. To study this process, quick stop sectional samples of hypoeutectic Al-Cu alloy chip formation, either as conventionally cast alloy or as “semi solid metal” are used. The type of chip formation is classified according to crack formation mechanism and propagation. During cutting, in all specimens used, quasi-continuous chips with built-up edge (BUE) are obtained. The formation of BUE is undesirable since it is a highly deformed body with a semi stable top which periodically breaks away giving rise to poor workpiece surface quality.

Ključne riječi
aluminium alloys; cutting process; chip formation; microstructure; semi solid metal

Hrčak ID: 71168

URI
https://hrcak.srce.hr/71168

[hrvatski]

Posjeta: 1.105 *