hrcak mascot   Srce   HID

Prethodno priopćenje

Surface layer properties of the workpiece material in high performance grinding

M. Gostimirović ; Faculty of Technical Science, University of Novi Sad, Serbia
P. Kovač ; Faculty of Technical Science, University of Novi Sad, Serbia
D. Ješić ; Faculty of Engineering, University of Banja Luka, Bosnia and Herzegovina
B. Škorić ; Faculty of Technical Science, University of Novi Sad, Serbia
B. Savković ; Faculty of Technical Science, University of Novi Sad, Serbia

Puni tekst: engleski, pdf (460 KB) str. 105-108 preuzimanja: 575* citiraj
APA 6th Edition
Gostimirović, M., Kovač, P., Ješić, D., Škorić, B. i Savković, B. (2012). Surface layer properties of the workpiece material in high performance grinding. Metalurgija, 51 (1), 105-108. Preuzeto s https://hrcak.srce.hr/71186
MLA 8th Edition
Gostimirović, M., et al. "Surface layer properties of the workpiece material in high performance grinding." Metalurgija, vol. 51, br. 1, 2012, str. 105-108. https://hrcak.srce.hr/71186. Citirano 06.08.2021.
Chicago 17th Edition
Gostimirović, M., P. Kovač, D. Ješić, B. Škorić i B. Savković. "Surface layer properties of the workpiece material in high performance grinding." Metalurgija 51, br. 1 (2012): 105-108. https://hrcak.srce.hr/71186
Harvard
Gostimirović, M., et al. (2012). 'Surface layer properties of the workpiece material in high performance grinding', Metalurgija, 51(1), str. 105-108. Preuzeto s: https://hrcak.srce.hr/71186 (Datum pristupa: 06.08.2021.)
Vancouver
Gostimirović M, Kovač P, Ješić D, Škorić B, Savković B. Surface layer properties of the workpiece material in high performance grinding. Metalurgija [Internet]. 2012 [pristupljeno 06.08.2021.];51(1):105-108. Dostupno na: https://hrcak.srce.hr/71186
IEEE
M. Gostimirović, P. Kovač, D. Ješić, B. Škorić i B. Savković, "Surface layer properties of the workpiece material in high performance grinding", Metalurgija, vol.51, br. 1, str. 105-108, 2012. [Online]. Dostupno na: https://hrcak.srce.hr/71186. [Citirano: 06.08.2021.]

Sažetak
This paper focuses on the development of high temperatures in the cutting zone during high performance grinding. In order to identify the influence of grinding temperature on surface integrity, temperatures were measured in the workpiece surface layer under different machining conditions. Beside this, under the same conditions, the surface layer properties of the workpiece material were determined through metallographic examination. Microstructureand microhardness of the workpiece surface layer, as well as the burned surfaces and microcracks phenomena were investigated. The conducted experimental investigations allow the surface layer properties of the workpiece material in high performance grinding to be defined.

Ključne riječi
high performance grinding; workpiece surface layer; temperature; surface integrity

Hrčak ID: 71186

URI
https://hrcak.srce.hr/71186

[hrvatski]

Posjeta: 845 *