hrcak mascot   Srce   HID

Review article

Mathematical modelling of flat and long hot rolling based on finite element methods (FEM)

R. Fabík ; VSB-TU Ostrava, FMME, Ostrava, Czech Republic
J. Kliber ; VSB-TU Ostrava, FMME, Ostrava, Czech Republic
Ilija Mamuzić ; University of Zagreb, Croatia
T. Kubina ; VSB-TU Ostrava, FMME, Ostrava, Czech Republic
S. A. Aksenov ; MIEM, Moscow, Russia

Fulltext: english, pdf (227 KB) pages 341-344 downloads: 850* cite
APA 6th Edition
Fabík, R., Kliber, J., Mamuzić, I., Kubina, T. & Aksenov, S.A. (2012). Mathematical modelling of flat and long hot rolling based on finite element methods (FEM). Metalurgija, 51 (3), 341-344. Retrieved from https://hrcak.srce.hr/80858
MLA 8th Edition
Fabík, R., et al. "Mathematical modelling of flat and long hot rolling based on finite element methods (FEM)." Metalurgija, vol. 51, no. 3, 2012, pp. 341-344. https://hrcak.srce.hr/80858. Accessed 25 Aug. 2019.
Chicago 17th Edition
Fabík, R., J. Kliber, Ilija Mamuzić, T. Kubina and S. A. Aksenov. "Mathematical modelling of flat and long hot rolling based on finite element methods (FEM)." Metalurgija 51, no. 3 (2012): 341-344. https://hrcak.srce.hr/80858
Harvard
Fabík, R., et al. (2012). 'Mathematical modelling of flat and long hot rolling based on finite element methods (FEM)', Metalurgija, 51(3), pp. 341-344. Available at: https://hrcak.srce.hr/80858 (Accessed 25 August 2019)
Vancouver
Fabík R, Kliber J, Mamuzić I, Kubina T, Aksenov SA. Mathematical modelling of flat and long hot rolling based on finite element methods (FEM). Metalurgija [Internet]. 2012 [cited 2019 August 25];51(3):341-344. Available from: https://hrcak.srce.hr/80858
IEEE
R. Fabík, J. Kliber, I. Mamuzić, T. Kubina and S.A. Aksenov, "Mathematical modelling of flat and long hot rolling based on finite element methods (FEM)", Metalurgija, vol.51, no. 3, pp. 341-344, 2012. [Online]. Available: https://hrcak.srce.hr/80858. [Accessed: 25 August 2019]

Abstracts
The aim of this paper is to critically assess the potential of mathematical modelling which uses finite element method software for solving operation problems in the hot rolling of flat and long products. We focused on concrete issues faced by rolling plants in the Moravian-Silesian region (Czech Republic). The investigation was always combined with field or pilot measurements or laboratory experiments.

Keywords
steel; hot rolling; finite elements method (FEM); roll pass design; friction

Hrčak ID: 80858

URI
https://hrcak.srce.hr/80858

[croatian]

Visits: 1.035 *