hrcak mascot   Srce   HID

Professional paper

DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING

Muhamed Bijedić
Husejin Duraković

Fulltext: english, pdf (2 MB) pages 31-37 downloads: 1.872* cite
APA 6th Edition
Bijedić, M. & Duraković, H. (2006). DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING. Tehnički vjesnik, 13 (3,4), 31-37. Retrieved from https://hrcak.srce.hr/8852
MLA 8th Edition
Bijedić, Muhamed and Husejin Duraković. "DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING." Tehnički vjesnik, vol. 13, no. 3,4, 2006, pp. 31-37. https://hrcak.srce.hr/8852. Accessed 22 Oct. 2019.
Chicago 17th Edition
Bijedić, Muhamed and Husejin Duraković. "DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING." Tehnički vjesnik 13, no. 3,4 (2006): 31-37. https://hrcak.srce.hr/8852
Harvard
Bijedić, M., and Duraković, H. (2006). 'DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING', Tehnički vjesnik, 13(3,4), pp. 31-37. Available at: https://hrcak.srce.hr/8852 (Accessed 22 October 2019)
Vancouver
Bijedić M, Duraković H. DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING. Tehnički vjesnik [Internet]. 2006 [cited 2019 October 22];13(3,4):31-37. Available from: https://hrcak.srce.hr/8852
IEEE
M. Bijedić and H. Duraković, "DYNAMIC MODEL OF THE PROCESS OF CONTACT AND CONVECTIVE PAPER DRYING", Tehnički vjesnik, vol.13, no. 3,4, pp. 31-37, 2006. [Online]. Available: https://hrcak.srce.hr/8852. [Accessed: 22 October 2019]

Abstracts
Dynamic model of continual process of contact and convective paper drying is recommended, as well as numerical procedure for its solution. Mathematical basis of the model suggested is partial differential equation of unsteady heat transfer by conduction, in direction perpendicular to paper surface. The equation has been solved with reference to two boundary conditions, one for each side of paper web, by finite difference method with iterative improvement (method predictor-corrector). As model fitting parameters contact coefficient and effective thermal conductivity are used. These parameters had been changed until the best agreement was achieved among calculated and observed moisture contents and
paper web surface temperatures. The model has been validated by comparing fitting parameters obtained with those from literature, as well as calculated values of heat consumed and moisture removed to corresponding quantities observed in the real industrial process.

Keywords
mathematical model; paper drying; contact drying; convective drying

Hrčak ID: 8852

URI
https://hrcak.srce.hr/8852

Visits: 2.214 *