hrcak mascot   Srce   HID

Izvorni znanstveni članak

Blue Laser Curing of Composites

Andrej Meniga ; Zagreb University School of Dentistry, Croatia
Jozo Šutalo ; Zagreb University School of Dentistry, Croatia
Davorka Azinović ; Institute of Physics, University of Zagreb
Goran Pichler ; Institute of Physics, University of Zagreb

Puni tekst: engleski, pdf (6 MB) str. 93-98 preuzimanja: 229* citiraj
APA 6th Edition
Meniga, A., Šutalo, J., Azinović, D. i Pichler, G. (1992). Blue Laser Curing of Composites. Acta stomatologica Croatica, 26 (2), 93-98. Preuzeto s https://hrcak.srce.hr/100657
MLA 8th Edition
Meniga, Andrej, et al. "Blue Laser Curing of Composites." Acta stomatologica Croatica, vol. 26, br. 2, 1992, str. 93-98. https://hrcak.srce.hr/100657. Citirano 25.02.2021.
Chicago 17th Edition
Meniga, Andrej, Jozo Šutalo, Davorka Azinović i Goran Pichler. "Blue Laser Curing of Composites." Acta stomatologica Croatica 26, br. 2 (1992): 93-98. https://hrcak.srce.hr/100657
Harvard
Meniga, A., et al. (1992). 'Blue Laser Curing of Composites', Acta stomatologica Croatica, 26(2), str. 93-98. Preuzeto s: https://hrcak.srce.hr/100657 (Datum pristupa: 25.02.2021.)
Vancouver
Meniga A, Šutalo J, Azinović D, Pichler G. Blue Laser Curing of Composites. Acta stomatologica Croatica [Internet]. 1992 [pristupljeno 25.02.2021.];26(2):93-98. Dostupno na: https://hrcak.srce.hr/100657
IEEE
A. Meniga, J. Šutalo, D. Azinović i G. Pichler, "Blue Laser Curing of Composites", Acta stomatologica Croatica, vol.26, br. 2, str. 93-98, 1992. [Online]. Dostupno na: https://hrcak.srce.hr/100657. [Citirano: 25.02.2021.]

Sažetak
There are two drawbacks o f standard photopolymerization units: relative inability o f a complete cure o f darker composite shades in premolar and molar regions, and a hazardous effect o f curing light on the eyes o f the dentist. A n argon-ion laser was used as a source for photopolymerization o f several light shade composite resins. The depth o f cure was measured at three different wavelengths (457.9 nm, 476.5 nm and 488.0 nm) and in the laser multiline mode. The depth o f cure measurements was determined with a micrometer. The best results were obtained with a 476.5 nm laser line for Silux composite: more than 3.8 mm in 2 seconds at 155 mW. This arrangement is not suitable for clinical use in the present form, but a low-power compact laser device has been proposed to meet practical requirements.

Ključne riječi
composite resins; photopolymerization; laser

Hrčak ID: 100657

URI
https://hrcak.srce.hr/100657

[hrvatski]

Posjeta: 406 *