hrcak mascot   Srce   HID

Sažetak sa skupa

Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction

W. Hedzelek
R. Zagalak
B. Mroz
P. Biskupski
T. Lodygowski
M. Wierszycki

Puni tekst: engleski, pdf (50 KB) str. 323-324 preuzimanja: 473* citiraj
APA 6th Edition
Hedzelek, W., Zagalak, R., Mroz, B., Biskupski, P., Lodygowski, T. i Wierszycki, M. (2002). Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction. Acta stomatologica Croatica, 36 (3), 323-324. Preuzeto s https://hrcak.srce.hr/10070
MLA 8th Edition
Hedzelek, W., et al. "Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction." Acta stomatologica Croatica, vol. 36, br. 3, 2002, str. 323-324. https://hrcak.srce.hr/10070. Citirano 04.12.2020.
Chicago 17th Edition
Hedzelek, W., R. Zagalak, B. Mroz, P. Biskupski, T. Lodygowski i M. Wierszycki. "Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction." Acta stomatologica Croatica 36, br. 3 (2002): 323-324. https://hrcak.srce.hr/10070
Harvard
Hedzelek, W., et al. (2002). 'Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction', Acta stomatologica Croatica, 36(3), str. 323-324. Preuzeto s: https://hrcak.srce.hr/10070 (Datum pristupa: 04.12.2020.)
Vancouver
Hedzelek W, Zagalak R, Mroz B, Biskupski P, Lodygowski T, Wierszycki M. Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction. Acta stomatologica Croatica [Internet]. 2002 [pristupljeno 04.12.2020.];36(3):323-324. Dostupno na: https://hrcak.srce.hr/10070
IEEE
W. Hedzelek, R. Zagalak, B. Mroz, P. Biskupski, T. Lodygowski i M. Wierszycki, "Numerical and Experimental Analysis of the Influence of Assembling Conditions and the Tolerance of Adapted Implantological Components on the Durability of the Prosthetic Construction", Acta stomatologica Croatica, vol.36, br. 3, str. 323-324, 2002. [Online]. Dostupno na: https://hrcak.srce.hr/10070. [Citirano: 04.12.2020.]

Sažetak
Durable fastening of implant retained prosthetic restorations, consisting of a series of elements, is one of the main factors of successful prosthetic rehabilitation. Clinically observed mechanical problems concerning the above mentioned components are complications that occur most often in the loading phase. The aim of this research was evaluation of the suppleness of the implant- -anti-rotary abutment construction to loosening under the influence of labile mechanical stress. Numerical analysis of resistance based on the finite element analysis (FEA) was used in the initial phase of this research. The actual tests were done with the use of a dynamic mechanical analyser Netzsch DMA 242 and a polarisation microscope equipped with a CCD camera. A series of implants connected with abutments composed of two parts were analysed. The results of initial studies utilizing the finite element analysis (FEA) allowed definition of the spheres of stress concentration. On the basis of in vitro experiments, the investigators evaluated the influence of tolerance of adapted implant-abutment interface fit, as well as the
torque used in the assembly of the abutment, on the occurrence of micromovements and loosening of components. The results strongly indicate correlation between the chosen variables and the risk of occurrence of mechanical complications.

Hrčak ID: 10070

URI
https://hrcak.srce.hr/10070

Posjeta: 637 *