hrcak mascot   Srce   HID

Original scientific paper

Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode

J. Tušek

Fulltext: english, pdf (401 KB) pages 89-92 downloads: 359* cite
APA 6th Edition
Tušek, J. (2002). Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode. Metalurgija, 41 (2), 89-92. Retrieved from https://hrcak.srce.hr/128592
MLA 8th Edition
Tušek, J.. "Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode." Metalurgija, vol. 41, no. 2, 2002, pp. 89-92. https://hrcak.srce.hr/128592. Accessed 3 Apr. 2020.
Chicago 17th Edition
Tušek, J.. "Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode." Metalurgija 41, no. 2 (2002): 89-92. https://hrcak.srce.hr/128592
Harvard
Tušek, J. (2002). 'Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode', Metalurgija, 41(2), pp. 89-92. Available at: https://hrcak.srce.hr/128592 (Accessed 03 April 2020)
Vancouver
Tušek J. Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode. Metalurgija [Internet]. 2002 [cited 2020 April 03];41(2):89-92. Available from: https://hrcak.srce.hr/128592
IEEE
J. Tušek, "Factors Affecting Weld Shape in Welding With a Triple-Wire Electrode", Metalurgija, vol.41, no. 2, pp. 89-92, 2002. [Online]. Available: https://hrcak.srce.hr/128592. [Accessed: 03 April 2020]

Abstracts
The article describes the influences of welding parameters, modes of metal transfer through the arc and the number of wires applied on weld formation and final shape. Diagrams show the influence of current intensity and arc voltage while a figure shows the influence of streaming and rotating metal transfers on the final weld shape. Diagrams and macro specimens, however, show the influence of the number of wires used on the weld shape and weld formation in submerged arc welding with a triple-wire electrode.

Hrčak ID: 128592

URI
https://hrcak.srce.hr/128592

[croatian]

Visits: 466 *