Izvorni znanstveni članak
https://doi.org/10.15255/CABEQ.2014.2108
Hydrogen or Soot?: Partial Oxidation of High-boiling Hydrocarbon Wastes
J. Lederer
; VÚANCH a. s., Revoluční 1521/84, 400 01 Ústí n/L
J. Hanika
orcid.org/0000-0002-9207-2890
; Institute of Chemical Process Fundamentals Academy of Sciences CR, 165 02 Prague 6
F. Nečesaný
; UNIPETROL RPA Co., 436 01 Litvínov
W. Poslední
; VÚANCH a. s., Revoluční 1521/84, 400 01 Ústí n/L
V. Tukač
; Institute of Chemical Technology Prague, 166 28 Prague 6, Czech Republic
V. Veselý
; Institute of Chemical Process Fundamentals Academy of Sciences CR, 165 02 Prague 6
Sažetak
This paper is focused on researching the influence of process parameters of partial oxidation, such as quality of hydrocarbon raw materials that differ in their stock properties (especially boiling point and viscosity) on the composition of output gas (selectivity of the process), and also on the formation extent of soot which could be used as an excellent and valued sorbent CHEZACARB® and/or filler in the rubber industry, e.g. for automotive tires. The effects of steam flow rate and the oxygen to raw material feed rate ratio is discussed as well. In addition, sensitivity of POX product composition depending
on properties of different raw materials and reaction conditions were analysed in this study.
Ključne riječi
partial oxidation; waste; hydrocarbon; hydrogen; soot
Hrčak ID:
137549
URI
Datum izdavanja:
6.4.2015.
Posjeta: 1.442 *