hrcak mascot   Srce   HID

Transactions of FAMENA, Vol.39 No.1 Travanj 2015.

Izvorni znanstveni članak

PROPERTIES OF DIAMOND-LIKE CARBON COATINGS DEPOSITED ON CoCrMo ALLOYS

Monika Madej ; Department of Tribology and Maintenance Materials, Kielce University of Technology, Kielce, Poland
Dariusz Ozimina ; Department of Tribology and Maintenance Materials, Kielce University of Technology, Kielce, Poland
Krzysztof Kurzydłowski ; Department of Materials Design, Warsaw University of Technology, Warsaw, Poland
Tomasz Płociński ; Department of Materials Design, Warsaw University of Technology, Warsaw, Poland
Piotr Wieciński ; Department of Materials Design, Warsaw University of Technology, Warsaw, Poland
Michał Styp-Rekowski ; UTP University of Science and Technology, Bydgoszcz, Poland
Maciej Matuszewski ; UTP University of Science and Technology, Bydgoszcz, Poland

Puni tekst: engleski, pdf (1 MB) str. 79-88 preuzimanja: 452* citiraj
APA 6th Edition
Madej, M., Ozimina, D., Kurzydłowski, K., Płociński, T., Wieciński, P., Styp-Rekowski, M. i Matuszewski, M. (2015). PROPERTIES OF DIAMOND-LIKE CARBON COATINGS DEPOSITED ON CoCrMo ALLOYS. Transactions of FAMENA, 39 (1), 79-88. Preuzeto s https://hrcak.srce.hr/138267
MLA 8th Edition
Madej, Monika, et al. "PROPERTIES OF DIAMOND-LIKE CARBON COATINGS DEPOSITED ON CoCrMo ALLOYS." Transactions of FAMENA, vol. 39, br. 1, 2015, str. 79-88. https://hrcak.srce.hr/138267. Citirano 18.06.2018.
Chicago 17th Edition
Madej, Monika, Dariusz Ozimina, Krzysztof Kurzydłowski, Tomasz Płociński, Piotr Wieciński, Michał Styp-Rekowski i Maciej Matuszewski. "PROPERTIES OF DIAMOND-LIKE CARBON COATINGS DEPOSITED ON CoCrMo ALLOYS." Transactions of FAMENA 39, br. 1 (2015): 79-88. https://hrcak.srce.hr/138267

Sažetak
This paper presents results of the structure analysis and tribological testing of a-C:H type diamond-like carbon (DLC) coatings produced by the Plasma Assisted Chemical Vapour Deposition (PACVD) technology on CoCrMo specimens. The DLC coating structure was studied by observing the surface topography using a scanning electron microscope (SEM) in the SE and STEM modes and a profilometer. Raman spectroscopy provided information on hybridized covalent bonds. The structural analysis involved observing the cross-sections of the coatings using a scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS) to determine the concentration and distribution of the constituent elements in the coating. Wear resistance was studied by applying a T-17 pin-on-plate tribological system: a polymeric pin made of ultra-high-molecular-weight polyethylene (UHMWPE) and a CoCrMo plate with a DLC coating. The testing was conducted under friction conditions using Ringer’s solution as a lubricant. The test results showed that the application of DLC coatings definitely improves the serviceability of a surface.

Ključne riječi
diamond-like carbon; coating; chemical analysis; wear-resistant

Hrčak ID: 138267

URI
https://hrcak.srce.hr/138267

Posjeta: 597 *