Prethodno priopćenje

Finite element analysis of Ti-based knee-joint implant

L. Zach ; Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
L. Kunčická ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
A. Macháčková ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
P. Růžička ; Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic
M. Pohludka ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
J. Juřica ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic

Sažetak

The focus of this paper was on finite element analysis of a PROSPON oncological knee endoprosthesis. The 3D CAD knee joint model, the designed FE PROSPON prosthesis model into which was integrated, was created on the basis of Visible Human Project CT scans. Analyses of stress state and contact pressures were performed in the kneebending position within 15,4° - 69,4° hip joint flection range. The results showed that the maximum achieved stress did not exceed the yield strength (90 MPa) of the material. The results of the stress state were in accordance with the distribution of contact pressure.

Ključne riječi

Ti-alloys; knee joint; implant; Finite Element Method (FEM)

Hrčak ID:

138289

URI

https://hrcak.srce.hr/138289

Datum izdavanja:

1.10.2015.

Posjeta: 1.282 *