hrcak mascot   Srce   HID

Prethodno priopćenje

Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers

Damir Dović
Srećko Švaić

Puni tekst: engleski, pdf (441 KB) str. 37-45 preuzimanja: 5.433* citiraj
APA 6th Edition
Dović, D. i Švaić, S. (2007). Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers. Tehnički vjesnik, 14 (1,2), 37-45. Preuzeto s https://hrcak.srce.hr/13511
MLA 8th Edition
Dović, Damir i Srećko Švaić. "Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers." Tehnički vjesnik, vol. 14, br. 1,2, 2007, str. 37-45. https://hrcak.srce.hr/13511. Citirano 19.06.2019.
Chicago 17th Edition
Dović, Damir i Srećko Švaić. "Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers." Tehnički vjesnik 14, br. 1,2 (2007): 37-45. https://hrcak.srce.hr/13511
Harvard
Dović, D., i Švaić, S. (2007). 'Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers', Tehnički vjesnik, 14(1,2), str. 37-45. Preuzeto s: https://hrcak.srce.hr/13511 (Datum pristupa: 19.06.2019.)
Vancouver
Dović D, Švaić S. Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers. Tehnički vjesnik [Internet]. 2007 [pristupljeno 19.06.2019.];14(1,2):37-45. Dostupno na: https://hrcak.srce.hr/13511
IEEE
D. Dović i S. Švaić, "Influence of Chevron Plates Geometry on Performances of Plate Heat Exchangers", Tehnički vjesnik, vol.14, br. 1,2, str. 37-45, 2007. [Online]. Dostupno na: https://hrcak.srce.hr/13511. [Citirano: 19.06.2019.]

Sažetak
The paper presents the investigation on the influence of different geometric parameters such as the chevron angle β, pressing depth b and corrugation wave length l on thermal-hydraulic performances of corrugated channels, commonly employed in plate heat exchangers. In order to fully understand a rather complex flow phenomenon occurring in corrugated channels, a number of dye based visualization tests have been conducted on two channels with chevron angles β=28° and β=61° at low Re-number flow conditions. The existence of two flow components has been recorded. The influence of flow components on the heat transfer depends mainly upon the angle β and Re-number as well as on the aspect ratio b/l. The exception are plates with the angle β<45° where the aspect ratio b/l does not significantly influence neither thermal nor hydraulic performances. Also, the influence of b/l on heat transfer declines as Re- numbers decrease. Thermal-hydraulic performances are evaluated in terms of the heat transfer coefficient, pressure drop and area goodness factor calculated from experimental data reported in the literature. Results indicate higher increase of the pressure drop relative to increase in the heat transfer for plates with deeper grooves (higher b/l) at fixed Re-number and angle β.

Ključne riječi
corrugated channels; flow; plate heat exchangers; thermal-hydraulic performances; visualization

Hrčak ID: 13511

URI
https://hrcak.srce.hr/13511

[hrvatski]

Posjeta: 5.913 *