hrcak mascot   Srce   HID

Preliminary communication

Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens

Marko Dunđer
Ivan Samardžić
Štefanija Klarić

Fulltext: english, pdf (522 KB) pages 47-57 downloads: 2.150* cite
APA 6th Edition
Dunđer, M., Samardžić, I. & Klarić, Š. (2007). Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens. Tehnički vjesnik, 14 (1,2), 47-57. Retrieved from https://hrcak.srce.hr/13512
MLA 8th Edition
Dunđer, Marko, et al. "Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens." Tehnički vjesnik, vol. 14, no. 1,2, 2007, pp. 47-57. https://hrcak.srce.hr/13512. Accessed 20 Nov. 2019.
Chicago 17th Edition
Dunđer, Marko, Ivan Samardžić and Štefanija Klarić. "Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens." Tehnički vjesnik 14, no. 1,2 (2007): 47-57. https://hrcak.srce.hr/13512
Harvard
Dunđer, M., Samardžić, I., and Klarić, Š. (2007). 'Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens', Tehnički vjesnik, 14(1,2), pp. 47-57. Available at: https://hrcak.srce.hr/13512 (Accessed 20 November 2019)
Vancouver
Dunđer M, Samardžić I, Klarić Š. Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens. Tehnički vjesnik [Internet]. 2007 [cited 2019 November 20];14(1,2):47-57. Available from: https://hrcak.srce.hr/13512
IEEE
M. Dunđer, I. Samardžić and Š. Klarić, "Influence of Cooling Time Δt8/5 on Welded Joint Properties of the Thermal Cycle Simulated TStE 420 Specimens", Tehnički vjesnik, vol.14, no. 1,2, pp. 47-57, 2007. [Online]. Available: https://hrcak.srce.hr/13512. [Accessed: 20 November 2019]

Abstracts
In this paper the influence of cooling time in temperature interval from 800 to 500 °C (Δt8/5) on hardness and impact strength of thermal cycle simulated specimens from high strength fine grained steel TStE 420 is explained. Also a research on scanning electron microscope and fractography analysis of characteristic fractures on simulated specimens is performed.

Keywords
cooling time Δt8/5; hardness; impact strength

Hrčak ID: 13512

URI
https://hrcak.srce.hr/13512

[croatian]

Visits: 2.575 *