hrcak mascot   Srce   HID

Izvorni znanstveni članak

Bond strength of hot – dip galvanized reinforcement (B500B) with concrete

P. Pokorný ; Czech Technical University – Klokner Institute, Prague, Czech Republic
D. Dobiáš ; Czech Technical University – Klokner Institute, Prague, Czech Republic
M. Vokáč ; Czech Technical University – Klokner Institute, Prague, Czech Republic

Puni tekst: engleski, pdf (233 KB) str. 337-340 preuzimanja: 360* citiraj
APA 6th Edition
Pokorný, P., Dobiáš, D. i Vokáč, M. (2016). Bond strength of hot – dip galvanized reinforcement (B500B) with concrete. Metalurgija, 55 (3), 337-340. Preuzeto s https://hrcak.srce.hr/153614
MLA 8th Edition
Pokorný, P., et al. "Bond strength of hot – dip galvanized reinforcement (B500B) with concrete." Metalurgija, vol. 55, br. 3, 2016, str. 337-340. https://hrcak.srce.hr/153614. Citirano 11.12.2019.
Chicago 17th Edition
Pokorný, P., D. Dobiáš i M. Vokáč. "Bond strength of hot – dip galvanized reinforcement (B500B) with concrete." Metalurgija 55, br. 3 (2016): 337-340. https://hrcak.srce.hr/153614
Harvard
Pokorný, P., Dobiáš, D., i Vokáč, M. (2016). 'Bond strength of hot – dip galvanized reinforcement (B500B) with concrete', Metalurgija, 55(3), str. 337-340. Preuzeto s: https://hrcak.srce.hr/153614 (Datum pristupa: 11.12.2019.)
Vancouver
Pokorný P, Dobiáš D, Vokáč M. Bond strength of hot – dip galvanized reinforcement (B500B) with concrete. Metalurgija [Internet]. 2016 [pristupljeno 11.12.2019.];55(3):337-340. Dostupno na: https://hrcak.srce.hr/153614
IEEE
P. Pokorný, D. Dobiáš i M. Vokáč, "Bond strength of hot – dip galvanized reinforcement (B500B) with concrete", Metalurgija, vol.55, br. 3, str. 337-340, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/153614. [Citirano: 11.12.2019.]

Sažetak
This paper evaluates the effect of initial corrosion damage to the surface of the hot - dip galvanized steel coating in fresh concrete on its final bond strength. The tests were performed on uncoated and hot-dip galvanized ribbed reinforcements. The measurement of bond stress (τm) according to the standard procedure (ASTM C234; ČSN 73 1328) revealed decreased bond strength of the coated reinforcement. Both types of reinforcement exhibit similar values of maximum shear stress (τ). To make some general conclusion, the bond strength also needs to be verified on smooth profiles.

Ključne riječi
corrosion; steel; hot-dip galvanized coating; pull – out test; ASTM C234

Hrčak ID: 153614

URI
https://hrcak.srce.hr/153614

Posjeta: 459 *