hrcak mascot   Srce   HID

Preliminary communication

Impact of residual elements on zinc quality in the production of zinc oxide

N. Luptáková ; CEITEC IPM, Institute of Physics of Materials, Academy of Sciences of the Czech Republic Brno, Czech Republic
P. Dymáček ; CEITEC IPM, Institute of Physics of Materials, Academy of Sciences of the Czech Republic Brno, Czech Republic
F. Pešlová ; Faculty of Faculty of Industrial Technology, University of Alexander Dubček in Trenčín, Slovak Republic
Z. Jurković ; Faculty of Engineering, University of Rijeka, Rijeka, Croatia
O. Barborák ; Faculty of Special Technology, Trencin University of Alexander Dubcek in Trencin, Slovak Republic
J. Stodola ; Faculty of Military Technology, University of Defence Brno, Czech Republic

Fulltext: english, pdf (380 KB) pages 407-410 downloads: 343* cite
APA 6th Edition
Luptáková, N., Dymáček, P., Pešlová, F., Jurković, Z., Barborák, O. & Stodola, J. (2016). Impact of residual elements on zinc quality in the production of zinc oxide. Metalurgija, 55 (3), 407-410. Retrieved from https://hrcak.srce.hr/153632
MLA 8th Edition
Luptáková, N., et al. "Impact of residual elements on zinc quality in the production of zinc oxide." Metalurgija, vol. 55, no. 3, 2016, pp. 407-410. https://hrcak.srce.hr/153632. Accessed 27 Nov. 2020.
Chicago 17th Edition
Luptáková, N., P. Dymáček, F. Pešlová, Z. Jurković, O. Barborák and J. Stodola. "Impact of residual elements on zinc quality in the production of zinc oxide." Metalurgija 55, no. 3 (2016): 407-410. https://hrcak.srce.hr/153632
Harvard
Luptáková, N., et al. (2016). 'Impact of residual elements on zinc quality in the production of zinc oxide', Metalurgija, 55(3), pp. 407-410. Available at: https://hrcak.srce.hr/153632 (Accessed 27 November 2020)
Vancouver
Luptáková N, Dymáček P, Pešlová F, Jurković Z, Barborák O, Stodola J. Impact of residual elements on zinc quality in the production of zinc oxide. Metalurgija [Internet]. 2016 [cited 2020 November 27];55(3):407-410. Available from: https://hrcak.srce.hr/153632
IEEE
N. Luptáková, P. Dymáček, F. Pešlová, Z. Jurković, O. Barborák and J. Stodola, "Impact of residual elements on zinc quality in the production of zinc oxide", Metalurgija, vol.55, no. 3, pp. 407-410, 2016. [Online]. Available: https://hrcak.srce.hr/153632. [Accessed: 27 November 2020]

Abstracts
The paper is focused on zinc oxide manufacturing process. The present work deals with the character and morphology of the input material for the production of ZnO by the indirect pyrometallurgical process. Undesirable phases in the feedstock can be identified through profound recognition of the source material and the nature of its microstructure. If these compounds diffuse into the lining during thermal processes, they become the cause of stress in metallurgical ceramics. The emergence of these chemical reactions may subsequently affect the entire metallurgical zinc smelting process. The results obtained by analysis are used to minimize waste - zinc slag and to eliminate the conditions which enable the formation of the undesired product, thereby increasing the productivity of the ZnO production.

Keywords
zinc; metallography; microstructure of zinc; zinc oxide; production of zinc oxide

Hrčak ID: 153632

URI
https://hrcak.srce.hr/153632

Visits: 468 *