hrcak mascot   Srce   HID

Izvorni znanstveni članak

The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars

S. Mróz ; Częstochowa University of Technology, Poland
P. Szota ; Częstochowa University of Technology, Poland
A. Stefanik ; Częstochowa University of Technology, Poland

Puni tekst: engleski, pdf (166 KB) str. 628-630 preuzimanja: 261* citiraj
APA 6th Edition
Mróz, S., Szota, P. i Stefanik, A. (2016). The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars. Metalurgija, 55 (4), 628-630. Preuzeto s https://hrcak.srce.hr/157383
MLA 8th Edition
Mróz, S., et al. "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars." Metalurgija, vol. 55, br. 4, 2016, str. 628-630. https://hrcak.srce.hr/157383. Citirano 10.12.2019.
Chicago 17th Edition
Mróz, S., P. Szota i A. Stefanik. "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars." Metalurgija 55, br. 4 (2016): 628-630. https://hrcak.srce.hr/157383
Harvard
Mróz, S., Szota, P., i Stefanik, A. (2016). 'The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars', Metalurgija, 55(4), str. 628-630. Preuzeto s: https://hrcak.srce.hr/157383 (Datum pristupa: 10.12.2019.)
Vancouver
Mróz S, Szota P, Stefanik A. The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars. Metalurgija [Internet]. 2016 [pristupljeno 10.12.2019.];55(4):628-630. Dostupno na: https://hrcak.srce.hr/157383
IEEE
S. Mróz, P. Szota i A. Stefanik, "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars", Metalurgija, vol.55, br. 4, str. 628-630, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/157383. [Citirano: 10.12.2019.]

Sažetak
The paper presents the results of investigation into the possibility of employing the groove rolling process to produce round Mg/Al bimetallic bars. The feedstock were round 22,5 mm Mg/Al bars that had been produced using the explosive welding method. The average thickness of the aluminium layer amounted to 1,7 mm. The Mg/Al bars were rolled in the stretching rolling passes. The theoretical analysis was done using the Forge2011® computer program. Based on the theoretical and experimental analysis it has been found that one of the main rolling process parameters influencing the quality of bond between the bimetal components is the initial feedstock temperature.

Ključne riječi
Mg/Al bimetallic bars; groove rolling; temperature; stress; numerical analysis

Hrčak ID: 157383

URI
https://hrcak.srce.hr/157383

Posjeta: 372 *