hrcak mascot   Srce   HID

Prethodno priopćenje

Binder fraction reduction in non-ferrous metals concentrates briquetting process

M. Jodkowski ; Silesian University of Technology, Katowice, Poland
J. Łabaj ; Silesian University of Technology, Katowice, Poland
J. Brzóska ; Silesian University of Technology, Katowice, Poland
D. Jama ; Silesian University of Technology, Katowice, Poland

Puni tekst: engleski, pdf (188 KB) str. 694-696 preuzimanja: 156* citiraj
APA 6th Edition
Jodkowski, M., Łabaj, J., Brzóska, J. i Jama, D. (2016). Binder fraction reduction in non-ferrous metals concentrates briquetting process. Metalurgija, 55 (4), 694-696. Preuzeto s https://hrcak.srce.hr/157426
MLA 8th Edition
Jodkowski, M., et al. "Binder fraction reduction in non-ferrous metals concentrates briquetting process." Metalurgija, vol. 55, br. 4, 2016, str. 694-696. https://hrcak.srce.hr/157426. Citirano 14.12.2019.
Chicago 17th Edition
Jodkowski, M., J. Łabaj, J. Brzóska i D. Jama. "Binder fraction reduction in non-ferrous metals concentrates briquetting process." Metalurgija 55, br. 4 (2016): 694-696. https://hrcak.srce.hr/157426
Harvard
Jodkowski, M., et al. (2016). 'Binder fraction reduction in non-ferrous metals concentrates briquetting process', Metalurgija, 55(4), str. 694-696. Preuzeto s: https://hrcak.srce.hr/157426 (Datum pristupa: 14.12.2019.)
Vancouver
Jodkowski M, Łabaj J, Brzóska J, Jama D. Binder fraction reduction in non-ferrous metals concentrates briquetting process. Metalurgija [Internet]. 2016 [pristupljeno 14.12.2019.];55(4):694-696. Dostupno na: https://hrcak.srce.hr/157426
IEEE
M. Jodkowski, J. Łabaj, J. Brzóska i D. Jama, "Binder fraction reduction in non-ferrous metals concentrates briquetting process", Metalurgija, vol.55, br. 4, str. 694-696, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/157426. [Citirano: 14.12.2019.]

Sažetak
The research results on a method of reducing the amount of binder applied during formation of metal concentrates are presented. Research was done on a model copper concentrate, which was mixed in assumed mass fraction with binder, as well as binder with addition of waste polyols. Such mixtures were formed and tested using static compressive strength, both immediately after forming and after the assumed seasoning times: 24, 96, 192 and 336 hours. The results confirm the possibility of binder dose lowering using high-efficiency system of binder dispersing with small addition of waste polyols and by homogeneous mixing of the binder with the material. In all examined cases increase in seasoning time influenced mechanical strength of the formed shapes advantageously.

Ključne riječi
metallurgical process; non-ferrous materials; cooper; waste polyols; briquetting

Hrčak ID: 157426

URI
https://hrcak.srce.hr/157426

Posjeta: 230 *