Pregledni rad

The effect of film thickness and concentration of SIO2 nanoparticles in PCL coatings on color change of tonal value increase

Josip Bota orcid.org/0000-0002-0496-6350 ; Graficki fakultet, Zagreb, Hrvatska
Zlata Hrnjak-Murgić orcid.org/0000-0003-4729-5603 ; Faculty of Chemical Engineering and Technology
Maja Brozović orcid.org/0000-0001-9955-2099 ; Faculty of Graphic Arts, Zagreb

Sažetak

This work presents research on the effects of polycaprolactone (PCL) and PCL modi ed with silica (Si2) nanoparticles, on the color change of o set printed paperboard. The nanocomposite was prepared with three different concentrations (1%, 2% and 3%) of SiO2, and applied in four different coating thicknesses (4 μm, 24 μm, 40 μm and 80 μm). The color values of the printed sample were measured before and a er the coating application to facilitate the measurement and comparison of the results. The research shows an overall preview of the effects of coating thickness and the influence of SiO2 modi cation on color change. Implementing silica particles in PCL improves the optical properties of the coating while adding additional beneficial properties to the paperboard.

Ključne riječi

Polycaprolactone; SiO2; coating; color change; paperboard; offset print

Hrčak ID:

158397

URI

https://hrcak.srce.hr/158397

Datum izdavanja:

6.5.2016.

Posjeta: 1.142 *