hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5552/drind.2016.1604

Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’

Iva Ištok ; Faculty of Forestry, Zagreb University, Zagreb, Croatia
Tomislav Sedlar ; Faculty of Forestry, Zagreb University, Zagreb, Croatia
Bogoslav Šefc ; Faculty of Forestry, Zagreb University, Zagreb, Croatia
Tomislav Sinković ; Faculty of Forestry, Zagreb University, Zagreb, Croatia
Tomica Perković ; Faculty of Forestry, Zagreb University, Zagreb, Croatia

Puni tekst: engleski, pdf (632 KB) str. 163-170 preuzimanja: 420* citiraj
APA 6th Edition
Ištok, I., Sedlar, T., Šefc, B., Sinković, T. i Perković, T. (2016). Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’. Drvna industrija, 67 (2), 163-170. https://doi.org/10.5552/drind.2016.1604
MLA 8th Edition
Ištok, Iva, et al. "Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’." Drvna industrija, vol. 67, br. 2, 2016, str. 163-170. https://doi.org/10.5552/drind.2016.1604. Citirano 25.10.2020.
Chicago 17th Edition
Ištok, Iva, Tomislav Sedlar, Bogoslav Šefc, Tomislav Sinković i Tomica Perković. "Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’." Drvna industrija 67, br. 2 (2016): 163-170. https://doi.org/10.5552/drind.2016.1604
Harvard
Ištok, I., et al. (2016). 'Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’', Drvna industrija, 67(2), str. 163-170. https://doi.org/10.5552/drind.2016.1604
Vancouver
Ištok I, Sedlar T, Šefc B, Sinković T, Perković T. Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’. Drvna industrija [Internet]. 2016 [pristupljeno 25.10.2020.];67(2):163-170. https://doi.org/10.5552/drind.2016.1604
IEEE
I. Ištok, T. Sedlar, B. Šefc, T. Sinković i T. Perković, "Physical Properties of Wood in Poplar Clones ’I-214’ and ’S1-8’", Drvna industrija, vol.67, br. 2, str. 163-170, 2016. [Online]. https://doi.org/10.5552/drind.2016.1604

Sažetak
Physical properties play an important role in predicting the quality of wood raw material. Variation in wood density and wood shrinkage of two different poplar clones cultivated on plantation “Drnje” near Koprivnica in Croatia was measured. One of poplar clones is ’I-214’, whose wood properties have already been studied and often compared. Other poplar clone is ʻS1-8ʼ, whose wood properties have been poorly researched, despite its good survival and growth rate. The results indicate that wood density of clone ’I-214’ is significantly higher in comparison to clone ʻS1-8ʼ, but the difference, as far as practice is concerned, is negligible. In both clones, wood density increases and shrinkage decreases from pith to bark. Increased growth rate has a negative effect on wood density of researched clones.

Ključne riječi
Poplar clones; ʻI-214ʼ; ʻS1-8ʼ; wood density variation; wood shrinkage variation

Hrčak ID: 160177

URI
https://hrcak.srce.hr/160177

[hrvatski]

Posjeta: 725 *