hrcak mascot   Srce   HID

Original scientific paper

Low and high frequency fatigue tests of nodular cast irons

A. Vaško ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
J. Belan ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
L. Kuchariková ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
E. Tillová ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic

Fulltext: english, pdf (309 KB) pages 25-28 downloads: 448* cite
APA 6th Edition
Vaško, A., Belan, J., Kuchariková, L. & Tillová, E. (2017). Low and high frequency fatigue tests of nodular cast irons. Metalurgija, 56 (1-2), 25-28. Retrieved from https://hrcak.srce.hr/168845
MLA 8th Edition
Vaško, A., et al. "Low and high frequency fatigue tests of nodular cast irons." Metalurgija, vol. 56, no. 1-2, 2017, pp. 25-28. https://hrcak.srce.hr/168845. Accessed 23 Feb. 2020.
Chicago 17th Edition
Vaško, A., J. Belan, L. Kuchariková and E. Tillová. "Low and high frequency fatigue tests of nodular cast irons." Metalurgija 56, no. 1-2 (2017): 25-28. https://hrcak.srce.hr/168845
Harvard
Vaško, A., et al. (2017). 'Low and high frequency fatigue tests of nodular cast irons', Metalurgija, 56(1-2), pp. 25-28. Available at: https://hrcak.srce.hr/168845 (Accessed 23 February 2020)
Vancouver
Vaško A, Belan J, Kuchariková L, Tillová E. Low and high frequency fatigue tests of nodular cast irons. Metalurgija [Internet]. 2017 [cited 2020 February 23];56(1-2):25-28. Available from: https://hrcak.srce.hr/168845
IEEE
A. Vaško, J. Belan, L. Kuchariková and E. Tillová, "Low and high frequency fatigue tests of nodular cast irons", Metalurgija, vol.56, no. 1-2, pp. 25-28, 2017. [Online]. Available: https://hrcak.srce.hr/168845. [Accessed: 23 February 2020]

Abstracts
The paper deals with the comparison of fatigue properties of nodular cast iron at low and high frequency cyclic loading. The specimens from three melts of nodular cast iron with different microstructure and mechanical properties were used for experiments. Fatigue tests were carried out at low and high frequency sinusoidal cyclic push-pull loading (stress ratio R = –1) at ambient temperature (T = 20 ± 5 °C). Low frequency fatigue tests were carried out using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100 at frequency f ≈ 120 Hz; high frequency fatigue tests were carried out using the ultrasonic fatigue testing device KAUP-ZU at frequency f ≈ 20 kHz.

Keywords
nodular cast iron; fatigue test; microstructure; mechanical properties

Hrčak ID: 168845

URI
https://hrcak.srce.hr/168845

Visits: 607 *