hrcak mascot   Srce   HID

Izvorni znanstveni članak

Change of mould flux properties during continuous casting of ferritic stainless steel

B. Arh ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Tehovnik ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Vode ; Institute of Metals and Technology, Ljubljana, Slovenia

Puni tekst: engleski, pdf (241 KB) str. 40-42 preuzimanja: 664* citiraj
APA 6th Edition
Arh, B., Tehovnik, F. i Vode, F. (2017). Change of mould flux properties during continuous casting of ferritic stainless steel. Metalurgija, 56 (1-2), 40-42. Preuzeto s https://hrcak.srce.hr/168877
MLA 8th Edition
Arh, B., et al. "Change of mould flux properties during continuous casting of ferritic stainless steel." Metalurgija, vol. 56, br. 1-2, 2017, str. 40-42. https://hrcak.srce.hr/168877. Citirano 27.01.2020.
Chicago 17th Edition
Arh, B., F. Tehovnik i F. Vode. "Change of mould flux properties during continuous casting of ferritic stainless steel." Metalurgija 56, br. 1-2 (2017): 40-42. https://hrcak.srce.hr/168877
Harvard
Arh, B., Tehovnik, F., i Vode, F. (2017). 'Change of mould flux properties during continuous casting of ferritic stainless steel', Metalurgija, 56(1-2), str. 40-42. Preuzeto s: https://hrcak.srce.hr/168877 (Datum pristupa: 27.01.2020.)
Vancouver
Arh B, Tehovnik F, Vode F. Change of mould flux properties during continuous casting of ferritic stainless steel. Metalurgija [Internet]. 2017 [pristupljeno 27.01.2020.];56(1-2):40-42. Dostupno na: https://hrcak.srce.hr/168877
IEEE
B. Arh, F. Tehovnik i F. Vode, "Change of mould flux properties during continuous casting of ferritic stainless steel", Metalurgija, vol.56, br. 1-2, str. 40-42, 2017. [Online]. Dostupno na: https://hrcak.srce.hr/168877. [Citirano: 27.01.2020.]

Sažetak
During the continuous casting of stainless steel the performance of the mould powder is a key factor in this process. The content of Cr in the steel is up to 18 %, high corrosion resistance of the steel is improved with Al addition, up to 4 %. The aim of the paper was to study the change in physical properties of the casting powder, due to reactions between Al in the steel with SiO2 in the mould flux during continuous casting. In order to identify the change in the ability of lubrication casting slag with time, depending on the increase in the content of alumina in the slag. On the basis of these results, the most suitable casting powder for continuous casting of ferritic stainless steel with high aluminium content was determined.

Ključne riječi
alloy steel; casting; powders-properties; SiO2; Al2O3

Hrčak ID: 168877

URI
https://hrcak.srce.hr/168877

Posjeta: 792 *