hrcak mascot   Srce   HID

Preliminary communication

Weldability investigation on real welded plates of fine-grained high-strength steel S960QL

I. Samardžić ; Faculty of Mechanical Engineering Slavonski Brod, Croatia
M. Dunđer ; Department for Polytechnic, University of Rijeka, Croatia
M. Katinić ; University of Applied Sciencees, Slavonski Brod, Croatia
N. Krnić ; University of Split, Croatia

Fulltext: english, pdf (222 KB) pages 207-210 downloads: 239* cite
APA 6th Edition
Samardžić, I., Dunđer, M., Katinić, M. & Krnić, N. (2017). Weldability investigation on real welded plates of fine-grained high-strength steel S960QL. Metalurgija, 56 (1-2), 207-210. Retrieved from https://hrcak.srce.hr/168942
MLA 8th Edition
Samardžić, I., et al. "Weldability investigation on real welded plates of fine-grained high-strength steel S960QL." Metalurgija, vol. 56, no. 1-2, 2017, pp. 207-210. https://hrcak.srce.hr/168942. Accessed 26 Jan. 2020.
Chicago 17th Edition
Samardžić, I., M. Dunđer, M. Katinić and N. Krnić. "Weldability investigation on real welded plates of fine-grained high-strength steel S960QL." Metalurgija 56, no. 1-2 (2017): 207-210. https://hrcak.srce.hr/168942
Harvard
Samardžić, I., et al. (2017). 'Weldability investigation on real welded plates of fine-grained high-strength steel S960QL', Metalurgija, 56(1-2), pp. 207-210. Available at: https://hrcak.srce.hr/168942 (Accessed 26 January 2020)
Vancouver
Samardžić I, Dunđer M, Katinić M, Krnić N. Weldability investigation on real welded plates of fine-grained high-strength steel S960QL. Metalurgija [Internet]. 2017 [cited 2020 January 26];56(1-2):207-210. Available from: https://hrcak.srce.hr/168942
IEEE
I. Samardžić, M. Dunđer, M. Katinić and N. Krnić, "Weldability investigation on real welded plates of fine-grained high-strength steel S960QL", Metalurgija, vol.56, no. 1-2, pp. 207-210, 2017. [Online]. Available: https://hrcak.srce.hr/168942. [Accessed: 26 January 2020]

Abstracts
The paper presents results of impact energy effects on real welded specimens of fine-grained high-strength S960QL steel, and elaborates the dependence of real welded specimen hardness on heat input. Results are obtained through measuring of hardness HV 10 and by experimental Charpy V-notch test. V-notch on test tubes was moved for 0,5 mm from the fusion line in the heat affected zone.

Keywords
weldability; S960QL; toughness; impact energy; hardness

Hrčak ID: 168942

URI
https://hrcak.srce.hr/168942

Visits: 357 *