hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150520132311

Increase of the operating life of active parts of cold-moulding tools

Ján Moravec ; University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia

Puni tekst: engleski, pdf (922 KB) str. 143-146 preuzimanja: 173* citiraj
APA 6th Edition
Moravec, J. (2017). Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 143-146. https://doi.org/10.17559/TV-20150520132311. Citirano 01.03.2021.
Chicago 17th Edition
Moravec, Ján. "Increase of the operating life of active parts of cold-moulding tools." Tehnički vjesnik 24, br. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Increase of the operating life of active parts of cold-moulding tools', Tehnički vjesnik, 24(Supplement 1), str. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Increase of the operating life of active parts of cold-moulding tools. Tehnički vjesnik [Internet]. 2017 [pristupljeno 01.03.2021.];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Increase of the operating life of active parts of cold-moulding tools", Tehnički vjesnik, vol.24, br. Supplement 1, str. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311
Puni tekst: hrvatski, pdf (922 KB) str. 143-146 preuzimanja: 164* citiraj
APA 6th Edition
Moravec, J. (2017). Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno. Tehnički vjesnik, 24 (Supplement 1), 143-146. https://doi.org/10.17559/TV-20150520132311
MLA 8th Edition
Moravec, Ján. "Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 143-146. https://doi.org/10.17559/TV-20150520132311. Citirano 01.03.2021.
Chicago 17th Edition
Moravec, Ján. "Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno." Tehnički vjesnik 24, br. Supplement 1 (2017): 143-146. https://doi.org/10.17559/TV-20150520132311
Harvard
Moravec, J. (2017). 'Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno', Tehnički vjesnik, 24(Supplement 1), str. 143-146. https://doi.org/10.17559/TV-20150520132311
Vancouver
Moravec J. Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno. Tehnički vjesnik [Internet]. 2017 [pristupljeno 01.03.2021.];24(Supplement 1):143-146. https://doi.org/10.17559/TV-20150520132311
IEEE
J. Moravec, "Povećanje radnog vijeka aktivnih dijelova alata za oblikovanje na hladno", Tehnički vjesnik, vol.24, br. Supplement 1, str. 143-146, 2017. [Online]. https://doi.org/10.17559/TV-20150520132311

Sažetak
Heat treatment of active components of cold – moulding tools is a necessary operation to guarantee their functionality. The tools made by this method loose the required quality of durability and period of service and losses caused by their frequent exchange are high. One way we can stop it is by coating the active parts of pressing tools by thin, hard and abrasion resistant deposit that is suitable by definite method of the tool stress.

Ključne riječi
Cold-moulding tool; EDAX analysis; Hardness; PVD coating; TiCN

Hrčak ID: 181252

URI
https://hrcak.srce.hr/181252

[hrvatski]

Posjeta: 539 *