hrcak mascot   Srce   HID

Izvorni znanstveni članak

3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

J. Gonzalez-Gutierez ; Polymer Processing, Montanuniversitaet Leoben, Austria
D. Godec ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia
R. Guráň ; Polymer Processing, Montanuniversitaet Leoben, Austria
M. Spoerk ; Polymer Processing, Montanuniversitaet Leoben, Austria
C. Kukla ; Industrial Liaison, Montanuniversitaet Leoben, Austria
C. Holzer ; Polymer Processing, Montanuniversitaet Leoben, Austria

Puni tekst: engleski, pdf (295 KB) str. 117-120 preuzimanja: 288* citiraj
APA 6th Edition
Gonzalez-Gutierez, J., Godec, D., Guráň, R., Spoerk, M., Kukla, C. i Holzer, C. (2018). 3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts. Metalurgija, 57 (1-2), 117-120. Preuzeto s https://hrcak.srce.hr/189379
MLA 8th Edition
Gonzalez-Gutierez, J., et al. "3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts." Metalurgija, vol. 57, br. 1-2, 2018, str. 117-120. https://hrcak.srce.hr/189379. Citirano 11.12.2019.
Chicago 17th Edition
Gonzalez-Gutierez, J., D. Godec, R. Guráň, M. Spoerk, C. Kukla i C. Holzer. "3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts." Metalurgija 57, br. 1-2 (2018): 117-120. https://hrcak.srce.hr/189379
Harvard
Gonzalez-Gutierez, J., et al. (2018). '3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts', Metalurgija, 57(1-2), str. 117-120. Preuzeto s: https://hrcak.srce.hr/189379 (Datum pristupa: 11.12.2019.)
Vancouver
Gonzalez-Gutierez J, Godec D, Guráň R, Spoerk M, Kukla C, Holzer C. 3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts. Metalurgija [Internet]. 2018 [pristupljeno 11.12.2019.];57(1-2):117-120. Dostupno na: https://hrcak.srce.hr/189379
IEEE
J. Gonzalez-Gutierez, D. Godec, R. Guráň, M. Spoerk, C. Kukla i C. Holzer, "3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts", Metalurgija, vol.57, br. 1-2, str. 117-120, 2018. [Online]. Dostupno na: https://hrcak.srce.hr/189379. [Citirano: 11.12.2019.]

Sažetak
Fused filament fabrication combined with debinding and sintering could be an economical process for 3D printing of metal parts. In this study, compounding, filament making and FFF processing of a feedstock material containing 55 vol. % of 17-4PH stainless steel powder and a multicomponent binder system are presented. For the FFF process, processing windows of the most significant parameters, such as range of extrusion temperatures (210 to 260 °C), flow rate multipliers (150 to 200 %), and 3D printing speed multipliers (60 to 100 %) were determined for a constant printing bed temperature of 60 °C.

Ključne riječi
stainless steel; powder; additive manufacturing (AM); FFF; scanning electron microscopy (SEM)

Projekti
EC / H2020 / 636881 / REProMag - Resource Efficient Production Route for Rare Earth Magnets

Hrčak ID: 189379

URI
https://hrcak.srce.hr/189379

Posjeta: 555 *