hrcak mascot   Srce   HID

Original scientific paper
https://doi.org/10.17559/TV-20140411120832

Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums

Jiří Fries   ORCID icon orcid.org/0000-0001-9776-6878 ; VŠB – Technical University of Ostrava, Faculty of Mining and Geology, Institute of clean technologies for mining and utilization of raw materials for energy use, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic
Tomáš Hapla ; VŠB – Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 15/2172, 708 33 Ostrava – Poruba, Czech Republic

Fulltext: english, pdf (1 MB) pages 7-14 downloads: 257* cite
APA 6th Edition
Fries, J. & Hapla, T. (2018). Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums. Tehnički vjesnik, 25 (Supplement 1), 7-14. https://doi.org/10.17559/TV-20140411120832
MLA 8th Edition
Fries, Jiří and Tomáš Hapla. "Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums." Tehnički vjesnik, vol. 25, no. Supplement 1, 2018, pp. 7-14. https://doi.org/10.17559/TV-20140411120832. Accessed 9 Apr. 2020.
Chicago 17th Edition
Fries, Jiří and Tomáš Hapla. "Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums." Tehnički vjesnik 25, no. Supplement 1 (2018): 7-14. https://doi.org/10.17559/TV-20140411120832
Harvard
Fries, J., and Hapla, T. (2018). 'Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums', Tehnički vjesnik, 25(Supplement 1), pp. 7-14. https://doi.org/10.17559/TV-20140411120832
Vancouver
Fries J, Hapla T. Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums. Tehnički vjesnik [Internet]. 2018 [cited 2020 April 09];25(Supplement 1):7-14. https://doi.org/10.17559/TV-20140411120832
IEEE
J. Fries and T. Hapla, "Influence Affecting the Lifetime of Belt Conveyor’s Drive Drums", Tehnički vjesnik, vol.25, no. Supplement 1, pp. 7-14, 2018. [Online]. https://doi.org/10.17559/TV-20140411120832

Abstracts
Belt slippage on drive drums of belt conveyors is generally considered as an undesirable phenomenon, which has a huge influence on wear of the drive drum lining or its destruction, reduces the operability of the entire device and should be then completely excluded from belt conveyor operation. Belt slips in the start-up phase can be long- or short-lasting with slight differences in speeds of the belt and drive drum and therefore cannot be registered. So it in necessary to seek options to avoid slips in a controlled start-up of belt conveyor. The paper suggests the effects of conveyor input parameters on the occurrence of those negative slips.

Keywords
belt conveyor; drive drum; measuring; lifetime; simulation; slippage; wear

Hrčak ID: 200591

URI
https://hrcak.srce.hr/200591

Visits: 456 *