hrcak mascot   Srce   HID

Original scientific paper
https://doi.org/10.17559/TV-20161012132937

Principles of Formation of Flexible Manufacturing Systems

Mikuláš Hajduk ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia
Marek Sukop ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia
Ján Semjon ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia
Rudolf Jánoš ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia
Jozef Varga ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia
Marek Vagaš ; Technical University of Kosice, Faculty of Mechanical Engineering, Department of Robotics, Park Komenského 8, 042 00 Košice, Slovakia

Fulltext: english, pdf (534 KB) pages 649-654 downloads: 392* cite
APA 6th Edition
Hajduk, M., Sukop, M., Semjon, J., Jánoš, R., Varga, J. & Vagaš, M. (2018). Principles of Formation of Flexible Manufacturing Systems. Tehnički vjesnik, 25 (3), 649-654. https://doi.org/10.17559/TV-20161012132937
MLA 8th Edition
Hajduk, Mikuláš, et al. "Principles of Formation of Flexible Manufacturing Systems." Tehnički vjesnik, vol. 25, no. 3, 2018, pp. 649-654. https://doi.org/10.17559/TV-20161012132937. Accessed 10 Dec. 2019.
Chicago 17th Edition
Hajduk, Mikuláš, Marek Sukop, Ján Semjon, Rudolf Jánoš, Jozef Varga and Marek Vagaš. "Principles of Formation of Flexible Manufacturing Systems." Tehnički vjesnik 25, no. 3 (2018): 649-654. https://doi.org/10.17559/TV-20161012132937
Harvard
Hajduk, M., et al. (2018). 'Principles of Formation of Flexible Manufacturing Systems', Tehnički vjesnik, 25(3), pp. 649-654. https://doi.org/10.17559/TV-20161012132937
Vancouver
Hajduk M, Sukop M, Semjon J, Jánoš R, Varga J, Vagaš M. Principles of Formation of Flexible Manufacturing Systems. Tehnički vjesnik [Internet]. 2018 [cited 2019 December 10];25(3):649-654. https://doi.org/10.17559/TV-20161012132937
IEEE
M. Hajduk, M. Sukop, J. Semjon, R. Jánoš, J. Varga and M. Vagaš, "Principles of Formation of Flexible Manufacturing Systems", Tehnički vjesnik, vol.25, no. 3, pp. 649-654, 2018. [Online]. https://doi.org/10.17559/TV-20161012132937

Abstracts
The article presents points necessary for the production re-prophilation into the flexible one through the generation of so called flexible manufacturing cells. Mentioned are the reasons and effects which are brought by the flexible production. In general, the key to the generation of the flexible production is the group technology based on the principle of the material flow analysis. The variants of the possible solutions based on the material flows confirm that the problem of the flexible manufacturing cells generation is not an easy one and unambiguous either. But considering only this one criterion is not sufficient for the practice because it does not consider for example the number of the pieces. Therefore the present article in the principle points at the application of the multiplied criteria about the part or machine, based on which more specifically stated is the cell profile, as number of machines, type of machines, intercellular transfers and so on.

Keywords
flexible cellular; flexible manufacturing cell; material flow; re-prophilation

Hrčak ID: 202563

URI
https://hrcak.srce.hr/202563

Visits: 700 *