hrcak mascot   Srce   HID

Pregledni rad
https://doi.org/10.17559/TV-20151027130036

Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys

Nikola Tomac ; Department of Electro Engineering, Automatics and Computer Science, Faculty of Maritime Studies, University of Rijeka, Studentska ulica 2, 51000 Rijeka, Croatia
Knut Sørby   ORCID icon orcid.org/0000-0002-8394-5565 ; Department of Production and Quality Engineering, Faculty of Engineering Science and Technology, Norwegian University of Science and Technology, 7491 Trondheim, Norway
Sandro Doboviček ; Department of Industrial Engineering and Management, Faculty of Engineering, University of Rijeka, Studentska ulica 2, 51000 Rijeka, Croatia Croatia

Puni tekst: engleski, pdf (1 MB) str. 940-943 preuzimanja: 208* citiraj
APA 6th Edition
Tomac, N., Sørby, K. i Doboviček, S. (2018). Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys. Tehnički vjesnik, 25 (3), 940-943. https://doi.org/10.17559/TV-20151027130036
MLA 8th Edition
Tomac, Nikola, et al. "Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys." Tehnički vjesnik, vol. 25, br. 3, 2018, str. 940-943. https://doi.org/10.17559/TV-20151027130036. Citirano 14.11.2019.
Chicago 17th Edition
Tomac, Nikola, Knut Sørby i Sandro Doboviček. "Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys." Tehnički vjesnik 25, br. 3 (2018): 940-943. https://doi.org/10.17559/TV-20151027130036
Harvard
Tomac, N., Sørby, K., i Doboviček, S. (2018). 'Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys', Tehnički vjesnik, 25(3), str. 940-943. https://doi.org/10.17559/TV-20151027130036
Vancouver
Tomac N, Sørby K, Doboviček S. Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys. Tehnički vjesnik [Internet]. 2018 [pristupljeno 14.11.2019.];25(3):940-943. https://doi.org/10.17559/TV-20151027130036
IEEE
N. Tomac, K. Sørby i S. Doboviček, "Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys", Tehnički vjesnik, vol.25, br. 3, str. 940-943, 2018. [Online]. https://doi.org/10.17559/TV-20151027130036

Sažetak
The present work highlights some factors which affect formation of a protective built-up layer (BUL) on the rake face of the cutting tool when cutting magnesium alloys. This work suggests that BUL can positively affect tool life, surface roughness, cutting speed and tool forces. The BUL is formed in cutting magnesium alloys with the PCD tool inserts at cutting speed range from 500 to 2500 m/min and at the carbide tool inserts at lower cutting speed range around 550 m/min. It has been found that deposit layers primarily have similar chemical composition as MnAl inclusions which are incorporated in the structure of the examined AZ91 magnesium alloys.

Ključne riječi
built-up layer; machining; magnesium

Hrčak ID: 202648

URI
https://hrcak.srce.hr/202648

Posjeta: 329 *