hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5552/drind.2018.1743

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Jacek Baranski   ORCID icon orcid.org/0000-0001-9040-9181 ; Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Energy and Industrial Apparatus, Gdansk, Poland
Marcin Jewartowski   ORCID icon orcid.org/0000-0003-2455-8837 ; Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Energy and Industrial Apparatus, Gdansk, Poland
Jan Wajs   ORCID icon orcid.org/0000-0002-3099-5972 ; Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Energy and Industrial Apparatus, Gdansk, Poland
Kazimierz Orlowski   ORCID icon orcid.org/0000-0003-1998-521X ; Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Energy and Industrial Apparatus, Gdansk, Poland
Tomasz Pikala ; REMA SA in Reszel, Poland

Puni tekst: engleski, pdf (811 KB) str. 223-230 preuzimanja: 130* citiraj
APA 6th Edition
Baranski, J., Jewartowski, M., Wajs, J., Orlowski, K. i Pikala, T. (2018). Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine. Drvna industrija, 69 (3), 223-230. https://doi.org/10.5552/drind.2018.1743
MLA 8th Edition
Baranski, Jacek, et al. "Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine." Drvna industrija, vol. 69, br. 3, 2018, str. 223-230. https://doi.org/10.5552/drind.2018.1743. Citirano 14.11.2019.
Chicago 17th Edition
Baranski, Jacek, Marcin Jewartowski, Jan Wajs, Kazimierz Orlowski i Tomasz Pikala. "Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine." Drvna industrija 69, br. 3 (2018): 223-230. https://doi.org/10.5552/drind.2018.1743
Harvard
Baranski, J., et al. (2018). 'Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine', Drvna industrija, 69(3), str. 223-230. https://doi.org/10.5552/drind.2018.1743
Vancouver
Baranski J, Jewartowski M, Wajs J, Orlowski K, Pikala T. Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine. Drvna industrija [Internet]. 2018 [pristupljeno 14.11.2019.];69(3):223-230. https://doi.org/10.5552/drind.2018.1743
IEEE
J. Baranski, M. Jewartowski, J. Wajs, K. Orlowski i T. Pikala, "Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine", Drvna industrija, vol.69, br. 3, str. 223-230, 2018. [Online]. https://doi.org/10.5552/drind.2018.1743

Sažetak
The article presents the results of experimental examination of the wood chip suction system in the existing sliding table saw before and after its modification. The studies focused on the extraction hood of the mentioned system. The methodical experimental research of the pressure distribution inside the hood during wood chip removal for the selected rotational speed of saw blades of 3500 and 6000 min-1 with a diameter of 300 mm and 450 mm were carried out. The analysis of the results allowed estimating the areas with insufficient vacuum pressure hindering the organized transport of wood chips in the sliding table saw. That pressure was the main factor influencing the decision to adjust the hood construction. To achieve the efficient performance, several changes in the hood geometry were implemented. The results obtained from the experiments were used at the stage of shape modification of the extraction hood. As a result, a new design of the chip suction system was obtained, vastly improving the chip extraction from the tool.

Ključne riječi
sliding table saw; chip removing system; experimental study

Hrčak ID: 206351

URI
https://hrcak.srce.hr/206351

[hrvatski]

Posjeta: 252 *