hrcak mascot   Srce   HID

Izvorni znanstveni članak

Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V

B. S. Sun ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, Ningbo, China
Z. L. Zhao ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, Ningbo, China
C. W. Wang ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, Ningbo, China

Puni tekst: engleski, pdf (351 KB) str. 127-130 preuzimanja: 85* citiraj
APA 6th Edition
Sun, B.S., Zhao, Z.L. i Wang, C.W. (2019). Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V. Metalurgija, 58 (1-2), 127-130. Preuzeto s https://hrcak.srce.hr/206514
MLA 8th Edition
Sun, B. S., et al. "Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V." Metalurgija, vol. 58, br. 1-2, 2019, str. 127-130. https://hrcak.srce.hr/206514. Citirano 22.09.2019.
Chicago 17th Edition
Sun, B. S., Z. L. Zhao i C. W. Wang. "Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V." Metalurgija 58, br. 1-2 (2019): 127-130. https://hrcak.srce.hr/206514
Harvard
Sun, B.S., Zhao, Z.L., i Wang, C.W. (2019). 'Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V', Metalurgija, 58(1-2), str. 127-130. Preuzeto s: https://hrcak.srce.hr/206514 (Datum pristupa: 22.09.2019.)
Vancouver
Sun BS, Zhao ZL, Wang CW. Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V. Metalurgija [Internet]. 2019 [pristupljeno 22.09.2019.];58(1-2):127-130. Dostupno na: https://hrcak.srce.hr/206514
IEEE
B.S. Sun, Z.L. Zhao i C.W. Wang, "Effect of process parameters on the end-face quality of cross-wedge rolling (CWR) shaft from titanium alloy Ti6Al4V", Metalurgija, vol.58, br. 1-2, str. 127-130, 2019. [Online]. Dostupno na: https://hrcak.srce.hr/206514. [Citirano: 22.09.2019.]

Sažetak
In order to verify the formability of CWR of titanium alloy Ti6Al4V, and to study effect of parameters on the end-face quality of CWR shafts from titanium alloy Ti6Al4V. The forming process was simulated with the DEFORM-3D software.The results show that the concavity increase with the increase of length and the diameter of billet; they decrease with the increase of spreading angle; they increase firstly and then decrease with the increase of area reduction; they decrease firstly and then increase slowly with the increase of forming angle. Also the order of the influence degree of the five parameters in descending order is: diameter of billet, length of billet, area reduction, spreading angle and forming angle. And the simulation results were verified by experiments.

Ključne riječi
titanium alloy Ti6Al4V; cross-wedge rolling; shaft; process parameters; concavity

Hrčak ID: 206514

URI
https://hrcak.srce.hr/206514

Posjeta: 143 *