hrcak mascot   Srce   HID

Izvorni znanstveni članak

Analysis of the initial deformabiliti of austenitic stainless stells with a bend test

B. Arh ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Tehovnik ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Vode ; Institute of Metals and Technology, Ljubljana, Slovenia
S. Malej ; Institute of Metals and Technology, Ljubljana, Slovenia
B. Podgornik ; Institute of Metals and Technology, Ljubljana, Slovenia

Puni tekst: engleski, pdf (301 KB) str. 139-142 preuzimanja: 83* citiraj
APA 6th Edition
Arh, B., Tehovnik, F., Vode, F., Malej, S. i Podgornik, B. (2019). Analysis of the initial deformabiliti of austenitic stainless stells with a bend test. Metalurgija, 58 (1-2), 139-142. Preuzeto s https://hrcak.srce.hr/206518
MLA 8th Edition
Arh, B., et al. "Analysis of the initial deformabiliti of austenitic stainless stells with a bend test." Metalurgija, vol. 58, br. 1-2, 2019, str. 139-142. https://hrcak.srce.hr/206518. Citirano 17.09.2019.
Chicago 17th Edition
Arh, B., F. Tehovnik, F. Vode, S. Malej i B. Podgornik. "Analysis of the initial deformabiliti of austenitic stainless stells with a bend test." Metalurgija 58, br. 1-2 (2019): 139-142. https://hrcak.srce.hr/206518
Harvard
Arh, B., et al. (2019). 'Analysis of the initial deformabiliti of austenitic stainless stells with a bend test', Metalurgija, 58(1-2), str. 139-142. Preuzeto s: https://hrcak.srce.hr/206518 (Datum pristupa: 17.09.2019.)
Vancouver
Arh B, Tehovnik F, Vode F, Malej S, Podgornik B. Analysis of the initial deformabiliti of austenitic stainless stells with a bend test. Metalurgija [Internet]. 2019 [pristupljeno 17.09.2019.];58(1-2):139-142. Dostupno na: https://hrcak.srce.hr/206518
IEEE
B. Arh, F. Tehovnik, F. Vode, S. Malej i B. Podgornik, "Analysis of the initial deformabiliti of austenitic stainless stells with a bend test", Metalurgija, vol.58, br. 1-2, str. 139-142, 2019. [Online]. Dostupno na: https://hrcak.srce.hr/206518. [Citirano: 17.09.2019.]

Sažetak
Austenitic stainless steel solidify under non-equilibrium conditions, and form two-phase microstructure of austenite and δ-ferrite. Workability of steels in hot are better in the primary crystallization of δ-ferrite. The influence of chemical composition on solid-state formation of delta ferrite phase during hot deformation was investigated. The laboratory prepared austenitic stainless SS2343 steel with the Creq/Nieq index – 1,62 were chosen for this research. The transformation of δ-ferrite during annealing in range 1 050 – 1 250 °C was analyzed. Hot bending test was selected for the evaluation of the initial plasticity of “as cast” SS2343 steel. Bending test of as cast steel plates with volume fraction 12,5 % of δ-ferrite have shown, that cracks do not form.

Ključne riječi
austenitic stainless steel; chemical composition; δ-ferrite; bending test; heat annealing

Hrčak ID: 206518

URI
https://hrcak.srce.hr/206518

Posjeta: 130 *