hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170704134134

The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings

Serkan Özel ; Bitlis Eren University, Faculty of Engineering Architectural, Department of Mechanical Engineering, 13000 Bitlis / Turkey

Puni tekst: engleski, pdf (2 MB) str. 318-322 preuzimanja: 519* citiraj
APA 6th Edition
Özel, S. (2019). The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings. Tehnički vjesnik, 26 (2), 318-322. https://doi.org/10.17559/TV-20170704134134
MLA 8th Edition
Özel, Serkan. "The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings." Tehnički vjesnik, vol. 26, br. 2, 2019, str. 318-322. https://doi.org/10.17559/TV-20170704134134. Citirano 12.05.2021.
Chicago 17th Edition
Özel, Serkan. "The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings." Tehnički vjesnik 26, br. 2 (2019): 318-322. https://doi.org/10.17559/TV-20170704134134
Harvard
Özel, S. (2019). 'The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings', Tehnički vjesnik, 26(2), str. 318-322. https://doi.org/10.17559/TV-20170704134134
Vancouver
Özel S. The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings. Tehnički vjesnik [Internet]. 2019 [pristupljeno 12.05.2021.];26(2):318-322. https://doi.org/10.17559/TV-20170704134134
IEEE
S. Özel, "The Effect of Coating Parameter on Properties of Plasma Sprayed Co Based Coatings", Tehnički vjesnik, vol.26, br. 2, str. 318-322, 2019. [Online]. https://doi.org/10.17559/TV-20170704134134

Sažetak
In this study, the surface of stainless steel was coated by Co based (Co, Mo, Cr) powders using plasma spray technique with different production parameters (500A, 550 A and 600 A current values) The coating layers were examined with optical microscopy, SEM, EDS and XRD analysis. The bonding strength of specimens was measured. In XRD studies, such compounds as Co3Mo2Si, CoMoSi, Co2Mo3, Co3Mo and Mo5Si3 have been identified on coating layers. The maximum hardness value has been determined in the specimen coated with 600 A.

Ključne riječi
stainless steel; Co; plasma spray coating; microstructure; bonding strength

Hrčak ID: 219506

URI
https://hrcak.srce.hr/219506

Posjeta: 776 *