hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20180321171428

Diagnosis of the Operational Gear Wheel Wear

Rafał Gołębski ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Arkadiusz Szarek ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland

Puni tekst: engleski, pdf (2 MB) str. 658-661 preuzimanja: 109* citiraj
APA 6th Edition
Gołębski, R. i Szarek, A. (2019). Diagnosis of the Operational Gear Wheel Wear. Tehnički vjesnik, 26 (3), 658-661. https://doi.org/10.17559/TV-20180321171428
MLA 8th Edition
Gołębski, Rafał i Arkadiusz Szarek. "Diagnosis of the Operational Gear Wheel Wear." Tehnički vjesnik, vol. 26, br. 3, 2019, str. 658-661. https://doi.org/10.17559/TV-20180321171428. Citirano 15.11.2019.
Chicago 17th Edition
Gołębski, Rafał i Arkadiusz Szarek. "Diagnosis of the Operational Gear Wheel Wear." Tehnički vjesnik 26, br. 3 (2019): 658-661. https://doi.org/10.17559/TV-20180321171428
Harvard
Gołębski, R., i Szarek, A. (2019). 'Diagnosis of the Operational Gear Wheel Wear', Tehnički vjesnik, 26(3), str. 658-661. https://doi.org/10.17559/TV-20180321171428
Vancouver
Gołębski R, Szarek A. Diagnosis of the Operational Gear Wheel Wear. Tehnički vjesnik [Internet]. 2019 [pristupljeno 15.11.2019.];26(3):658-661. https://doi.org/10.17559/TV-20180321171428
IEEE
R. Gołębski i A. Szarek, "Diagnosis of the Operational Gear Wheel Wear", Tehnički vjesnik, vol.26, br. 3, str. 658-661, 2019. [Online]. https://doi.org/10.17559/TV-20180321171428

Sažetak
The article presents an analysis in the field of gear wheel testing method application. The results of tests of gear wheel teeth taken from a damaged gear rim are reposted. Tests were carried out on specimens to establish the causes of gear wheel tooth cracking. Macroscopic examination was made, which confirmed the occurrence of top layer spalling. An analysis to examine the damage to the surfaces of mating gear wheels is described. A destructive testing method was employed. The results of hardness and microhardness tests and metallographic analysis are presented.

Ključne riječi
destructive testing; hardness; microhardness; spur gear

Hrčak ID: 220988

URI
https://hrcak.srce.hr/220988

Posjeta: 188 *