hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.32985/ijeces.10.1.5

Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype

Mohamad Aizat Abdul Wahit ; Universiti Putra Malaysia, Department of Electrical and Electronics Engineering,Serdang, Selangor, Malaysia
Fatimahtul Zahrah Romzi ; Universiti Putra Malaysia, Department of Electrical and Electronics Engineering,Serdang, Selangor, Malaysia
Siti Anom Ahmad ; Universiti Putra Malaysia, Malaysian Research Institute on Ageing,Serdang, Selangor, Malaysia
Mohd Hamiruce Marhaban ; Universiti Putra Malaysia, Department of Electrical and Electronics Engineering,Serdang, Selangor, Malaysia
Wada Chikamune ; Kyushu Institute of Technology, Department of Human Intelligence Systems, Graduate School of Life Science and Systems Engineering, Japan

Puni tekst: engleski, pdf (2 MB) str. 0-0 preuzimanja: 117* citiraj
APA 6th Edition
Wahit, M.A.A., Romzi, F.Z., Ahmad, S.A., Marhaban, M.H. i Chikamune, W. (2019). Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype. International journal of electrical and computer engineering systems, 10. (1.), 0-0. https://doi.org/10.32985/ijeces.10.1.5
MLA 8th Edition
Wahit, Mohamad Aizat Abdul, et al. "Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype." International journal of electrical and computer engineering systems, vol. 10., br. 1., 2019, str. 0-0. https://doi.org/10.32985/ijeces.10.1.5. Citirano 22.01.2021.
Chicago 17th Edition
Wahit, Mohamad Aizat Abdul, Fatimahtul Zahrah Romzi, Siti Anom Ahmad, Mohd Hamiruce Marhaban i Wada Chikamune. "Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype." International journal of electrical and computer engineering systems 10., br. 1. (2019): 0-0. https://doi.org/10.32985/ijeces.10.1.5
Harvard
Wahit, M.A.A., et al. (2019). 'Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype', International journal of electrical and computer engineering systems, 10.(1.), str. 0-0. https://doi.org/10.32985/ijeces.10.1.5
Vancouver
Wahit MAA, Romzi FZ, Ahmad SA, Marhaban MH, Chikamune W. Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype. International journal of electrical and computer engineering systems [Internet]. 2019 [pristupljeno 22.01.2021.];10.(1.):0-0. https://doi.org/10.32985/ijeces.10.1.5
IEEE
M.A.A. Wahit, F.Z. Romzi, S.A. Ahmad, M.H. Marhaban i W. Chikamune, "Development of Real-Time Electromyography Controlled 3D Printed Robot Hand Prototype", International journal of electrical and computer engineering systems, vol.10., br. 1., str. 0-0, 2019. [Online]. https://doi.org/10.32985/ijeces.10.1.5

Sažetak
Developing an anthropomorphic robotic hand (ARH) has become a relevant research field due to the need to help the amputees live their life as normal people. However, the current state of research is unsatisfactory, especially in terms of structural design and the robot control method. This paper, which proposes a 3D printed ARH structure that follows the average size of an adult human hand, consists of five fingers with a tendon-driven actuator mechanism embedded in each finger structure. Besides that, the movement capability of the developed 3D printed robot hand validated by using motion capture analysis to ensure the similarity to the expected motion range in structural design is achieved. Its system functionality test was conducted in three stages: (1) muscular activity detection, (2) object detection for individual finger movement control, and (3) integration of both stages in one algorithm. Finally, an ARH was developed, which resembles human hand features, as well as a reliable system that can perform opened hand palm and some grasping postures for daily use.

Ključne riječi
anthropomorphic robotic hand (ARH); electromyography (EMG); reliable system; robot hand

Hrčak ID: 231895

URI
https://hrcak.srce.hr/231895

Posjeta: 208 *