hrcak mascot   Srce   HID

Original scientific paper

Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening

P. T. Iswanto ; Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
E. U. K. Maliwemu ; Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
V. Malau ; Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
F. Imaduddin ; Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia
H. M. Sadida ; Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia

Fulltext: english, pdf (681 KB) pages 183-186 downloads: 113* cite
APA 6th Edition
Iswanto, P.T., Maliwemu, E.U.K., Malau, V., Imaduddin, F. & Sadida, H.M. (2020). Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening. Metalurgija, 59 (2), 183-186. Retrieved from https://hrcak.srce.hr/232462
MLA 8th Edition
Iswanto, P. T., et al. "Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening." Metalurgija, vol. 59, no. 2, 2020, pp. 183-186. https://hrcak.srce.hr/232462. Accessed 31 Oct. 2020.
Chicago 17th Edition
Iswanto, P. T., E. U. K. Maliwemu, V. Malau, F. Imaduddin and H. M. Sadida. "Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening." Metalurgija 59, no. 2 (2020): 183-186. https://hrcak.srce.hr/232462
Harvard
Iswanto, P.T., et al. (2020). 'Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening', Metalurgija, 59(2), pp. 183-186. Available at: https://hrcak.srce.hr/232462 (Accessed 31 October 2020)
Vancouver
Iswanto PT, Maliwemu EUK, Malau V, Imaduddin F, Sadida HM. Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening. Metalurgija [Internet]. 2020 [cited 2020 October 31];59(2):183-186. Available from: https://hrcak.srce.hr/232462
IEEE
P.T. Iswanto, E.U.K. Maliwemu, V. Malau, F. Imaduddin and H.M. Sadida, "Surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L by shot peening", Metalurgija, vol.59, no. 2, pp. 183-186, 2020. [Online]. Available: https://hrcak.srce.hr/232462. [Accessed: 31 October 2020]

Abstracts
The surface of AISI 316L was treated by shot peening at different shot durations. Shot peening variables in this work are shot durations for 0, 4, 10 and 20 minutes, with compressor pressure at 8 kgf/mm2, steel balls with a diameter of 0,6 mm and shot gun nozzle diameter of 5 mm. The purpose of this research is to investigate the shot peening effect duration on surface roughness, hardness, and fatigue-corrosion characteristic of AISI 316L in 0,9 % NaCl solution. The results show that the duration of shot peening can affect the improvement on surface roughness, hardness, wettability and fatigue-corrosion life of AISI 316L.

Keywords
AISI 316L; shot peening; fatigue-corrosion; hardness; surface roughness

Hrčak ID: 232462

URI
https://hrcak.srce.hr/232462

Visits: 187 *