hrcak mascot   Srce   HID

Prethodno priopćenje

Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill

S. A. Mashekov   ORCID icon orcid.org/0000-0002-9577-2219 ; Kazakh National Technical University, Almaty, Kazakhstan
G. A. Smailova   ORCID icon orcid.org/0000-0003-2293-6232 ; Kazakh Agrarian University, Almaty, Kazakhstan
A. M. Alshynova ; Almaty Technological University, Almaty, Kazakhstan
A. Zhauyt   ORCID icon orcid.org/0000-0003-3905-6928 ; Almaty University of Power Engineering and Telecommunications, Almaty, Kazakhstan
N. S. Sembaev ; Pavlodar State University, Pavlodar, Kazakhstan
M. R. Maulenova   ORCID icon orcid.org/0000-0003-3430-8102 ; Kazakh National Technical University, Almaty, Kazakhstan

Puni tekst: engleski, pdf (319 KB) str. 203-206 preuzimanja: 75* citiraj
APA 6th Edition
Mashekov, S.A., Smailova, G.A., Alshynova, A.M., Zhauyt, A., Sembaev, N.S. i Maulenova, M.R. (2020). Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill. Metalurgija, 59 (2), 203-206. Preuzeto s https://hrcak.srce.hr/232472
MLA 8th Edition
Mashekov, S. A., et al. "Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill." Metalurgija, vol. 59, br. 2, 2020, str. 203-206. https://hrcak.srce.hr/232472. Citirano 24.10.2020.
Chicago 17th Edition
Mashekov, S. A., G. A. Smailova, A. M. Alshynova, A. Zhauyt, N. S. Sembaev i M. R. Maulenova. "Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill." Metalurgija 59, br. 2 (2020): 203-206. https://hrcak.srce.hr/232472
Harvard
Mashekov, S.A., et al. (2020). 'Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill', Metalurgija, 59(2), str. 203-206. Preuzeto s: https://hrcak.srce.hr/232472 (Datum pristupa: 24.10.2020.)
Vancouver
Mashekov SA, Smailova GA, Alshynova AM, Zhauyt A, Sembaev NS, Maulenova MR. Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill. Metalurgija [Internet]. 2020 [pristupljeno 24.10.2020.];59(2):203-206. Dostupno na: https://hrcak.srce.hr/232472
IEEE
S.A. Mashekov, G.A. Smailova, A.M. Alshynova, A. Zhauyt, N.S. Sembaev i M.R. Maulenova, "Investigation of the formation evolution of aluminum alloy 1050 structure during rolling in the spiral rollers and the longitudinal wedge mill", Metalurgija, vol.59, br. 2, str. 203-206, 2020. [Online]. Dostupno na: https://hrcak.srce.hr/232472. [Citirano: 24.10.2020.]

Sažetak
This article presents a new methodof obtaining the sheet steel with ultrafine-grained structure. The ultrafinegrained structure is obtained by implementing severe plastic deformation developed by a spiral roller. This paper investigates the stress-strain state (SSS) of the workpiece during rolling in a spiral roller and a longitudinal wedge mill (LWM). A rational technology of rolling aluminum alloy 1050 was developed and tested under the laboratory conditions. It was proved that the system achieves an equilibrium state by diffusion along the grain boundaries accelerated by the flow of vacancies formed during the deformation. It has been established that rolling aluminum alloy 1050in the spiral rollers and LWM leads to an increase in the strength and plastic properties of the sheet metal.

Ključne riječi
aluminum alloys; rolling; ultrafine-grained structure; strength; ductility

Hrčak ID: 232472

URI
https://hrcak.srce.hr/232472

Posjeta: 132 *