hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.31803/tg-20191112161707

Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device

Elmedin Mešić   ORCID icon orcid.org/0000-0002-3695-416X ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Adil Muminović ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Mirsad Čolić ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Marin Petrović   ORCID icon orcid.org/0000-0002-4623-8597 ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Nedim Pervan*   ORCID icon orcid.org/0000-0001-7366-202X ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina

Puni tekst: engleski, pdf (1 MB) str. 1-6 preuzimanja: 95* citiraj
APA 6th Edition
Mešić, E., Muminović, A., Čolić, M., Petrović, M. i Pervan*, N. (2020). Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device. Tehnički glasnik, 14 (1), 1-6. https://doi.org/10.31803/tg-20191112161707
MLA 8th Edition
Mešić, Elmedin, et al. "Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device." Tehnički glasnik, vol. 14, br. 1, 2020, str. 1-6. https://doi.org/10.31803/tg-20191112161707. Citirano 08.08.2020.
Chicago 17th Edition
Mešić, Elmedin, Adil Muminović, Mirsad Čolić, Marin Petrović i Nedim Pervan*. "Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device." Tehnički glasnik 14, br. 1 (2020): 1-6. https://doi.org/10.31803/tg-20191112161707
Harvard
Mešić, E., et al. (2020). 'Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device', Tehnički glasnik, 14(1), str. 1-6. https://doi.org/10.31803/tg-20191112161707
Vancouver
Mešić E, Muminović A, Čolić M, Petrović M, Pervan* N. Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device. Tehnički glasnik [Internet]. 2020 [pristupljeno 08.08.2020.];14(1):1-6. https://doi.org/10.31803/tg-20191112161707
IEEE
E. Mešić, A. Muminović, M. Čolić, M. Petrović i N. Pervan*, "Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device", Tehnički glasnik, vol.14, br. 1, str. 1-6, 2020. [Online]. https://doi.org/10.31803/tg-20191112161707

Sažetak
This paper presents the development and experimental verification of a generative CAD/FEM model of an external bone fixation device. The generative CAD model is based on the development of a parameterized skeleton algorithm and sub-algorithms for parametric modeling and positioning of components within a fixator assembly using the CATIA CAD/CAM/CAE system. After a structural analysis performed in the same system, the FEM model was used to follow interfragmentary fracture displacements, axial displacements at the loading site, as well as principal and Von Mises stresses at the fixator connecting rod. The experimental analysis verified the results of the CAD/FEM model from an aspect of axial displacement at the load site using a material testing machine (deviation of 3.9 %) and the principal stresses in the middle of the fixator connecting rod using tensometric measurements (deviation of 3.5 %).The developed model allows a reduction of the scope of preclinical experimental investigations, prediction of the behavior of the fixator during the postoperative fracture treatment period and creation of preconditions for subsequent structural optimization of the external fixator.

Ključne riječi
external fixation device; generative CAD model; interfragmentary displacements; principal stresses

Hrčak ID: 235955

URI
https://hrcak.srce.hr/235955

Posjeta: 213 *