hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.17559/TV-20200102202928

Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo

Emrah Aykac ; Kutahya Dumlupinar University, Institute of Science Studies, Kutahya, Turkey
Sait Dundar Sofuoglu* ; Kutahya Dumlupinar University, Simav Technology Faculty, Wood Works Industrial Engineering Department, 43500, Simav, Kutahya, Turkey

Puni tekst: engleski, pdf (1 MB) str. 684-688 preuzimanja: 36* citiraj
APA 6th Edition
Aykac, E. i Sofuoglu*, S.D. (2021). Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo. Tehnički vjesnik, 28 (2), 684-688. https://doi.org/10.17559/TV-20200102202928
MLA 8th Edition
Aykac, Emrah i Sait Dundar Sofuoglu*. "Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo." Tehnički vjesnik, vol. 28, br. 2, 2021, str. 684-688. https://doi.org/10.17559/TV-20200102202928. Citirano 12.05.2021.
Chicago 17th Edition
Aykac, Emrah i Sait Dundar Sofuoglu*. "Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo." Tehnički vjesnik 28, br. 2 (2021): 684-688. https://doi.org/10.17559/TV-20200102202928
Harvard
Aykac, E., i Sofuoglu*, S.D. (2021). 'Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo', Tehnički vjesnik, 28(2), str. 684-688. https://doi.org/10.17559/TV-20200102202928
Vancouver
Aykac E, Sofuoglu* SD. Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo. Tehnički vjesnik [Internet]. 2021 [pristupljeno 12.05.2021.];28(2):684-688. https://doi.org/10.17559/TV-20200102202928
IEEE
E. Aykac i S.D. Sofuoglu*, "Investigation of the Effect of Machining Parameters on Surface Quality in Bamboo", Tehnički vjesnik, vol.28, br. 2, str. 684-688, 2021. [Online]. https://doi.org/10.17559/TV-20200102202928

Sažetak
The purpose of the study is to obtain optimum processing conditions by investigating the effect of machining parameters of bamboo (Bambusa) material on surface quality. Evaluation was performed for four machining parameters (cutters type, spindle speed, feed rate and depth of cut) and their effects on surface roughness. According to obtained data, roughness values increased with increasing machining depth. Increase in roughness values between 8000 rpm and 10000 rpm, decrease in roughness values between 10000 rpm and 14000 rpm, and increase in roughness values between 14000 rpm and 16000 rpm was observed. Roughness value increased with increasing cutter feed speed. Roughness value decreased by increasing number of blades in cutter in cutter type. The lowest roughness value was obtained at a machining depth of 2 mm at a spindle speed of 14000 rpm, a feed rate of 1000 mm/min and a cutter type 3 (four flute spiral end mill).

Ključne riječi
bamboo; machining; surface roughness; wood

Hrčak ID: 255897

URI
https://hrcak.srce.hr/255897

Posjeta: 74 *