hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20200518180158

A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants

Onur Can Kalay ; Bursa Uludag University, Department of Mechanical Engineering, Bursa 16059, Turkey
Hasan Karaman ; Bursa Uludag University, Department of Mechanical Engineering, Bursa 16059, Turkey
Fatih Karpat*   ORCID icon orcid.org/0000-0001-8474-7328 ; Bursa Uludag University, Department of Mechanical Engineering, Bursa 16059, Turkey
Oğuz Doğan ; Kahramanmaras Sutcu Imam University, Department of Mechanical Engineering, Kahramanmaras 46050, Turkey
Celalettin Yüce ; Bursa Technical University, Department of Mechatronics Engineering, Bursa 16310, Turkey
Esin Karpat ; Bursa Uludag University, Department of Electrical and Electronics Engineering, Bursa 16059, Turkey
Lokesh Dhanasekaran ; University of Central Oklahoma, Department of Engineering and Physics, Edmond 73034, USA
Morshed Khandaker ; University of Central Oklahoma, Department of Engineering and Physics, Edmond 73034, USA

Puni tekst: engleski, pdf (2 MB) str. 2045-2054 preuzimanja: 39* citiraj
APA 6th Edition
Kalay, O.C., Karaman, H., Karpat*, F., Doğan, O., Yüce, C., Karpat, E., ... Khandaker, M. (2021). A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants. Tehnički vjesnik, 28 (6), 2045-2054. https://doi.org/10.17559/TV-20200518180158
MLA 8th Edition
Kalay, Onur Can, et al. "A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants." Tehnički vjesnik, vol. 28, br. 6, 2021, str. 2045-2054. https://doi.org/10.17559/TV-20200518180158. Citirano 01.12.2021.
Chicago 17th Edition
Kalay, Onur Can, Hasan Karaman, Fatih Karpat*, Oğuz Doğan, Celalettin Yüce, Esin Karpat, Lokesh Dhanasekaran i Morshed Khandaker. "A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants." Tehnički vjesnik 28, br. 6 (2021): 2045-2054. https://doi.org/10.17559/TV-20200518180158
Harvard
Kalay, O.C., et al. (2021). 'A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants', Tehnički vjesnik, 28(6), str. 2045-2054. https://doi.org/10.17559/TV-20200518180158
Vancouver
Kalay OC, Karaman H, Karpat* F, Doğan O, Yüce C, Karpat E i sur. A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants. Tehnički vjesnik [Internet]. 2021 [pristupljeno 01.12.2021.];28(6):2045-2054. https://doi.org/10.17559/TV-20200518180158
IEEE
O.C. Kalay, et al., "A Comparative 3D Finite Element Computational Study of Stress Distribution and Stress Transfer in Small-Diameter Conical Dental Implants", Tehnički vjesnik, vol.28, br. 6, str. 2045-2054, 2021. [Online]. https://doi.org/10.17559/TV-20200518180158

Sažetak
The implant design is one of the main factors in implant stability because it affects the contact area between the bone and the implant surface and the stress-strain distribution at the bone-implant interface. In this study, the effect of different groove geometries on stress-strain distributions in small-diameter conical implants is investigated using the finite element method (FEM). Four different thread models (rectangular, buttressed, reverse buttressed, and symmetrical profile) are created by changing the groove geometry on the one-piece implants, and the obtained results are compared. The stress shielding effect is investigated through the dimensionless numbers that characterize the load-sharing between the bone-implant. It is determined that the lowest stress distribution is observed with rectangular profiled groove geometry. Besides, it is obtained that the buttressed groove geometry minimizes the stress effects transmitted to the periphery of the implant. The symmetrical profiles had better performance than rectangular profiles in stress transfer.

Ključne riječi
finite element method; groove geometry; implant; implant design

Hrčak ID: 264115

URI
https://hrcak.srce.hr/264115

Posjeta: 74 *