hrcak mascot   Srce   HID

Preliminary communication

Linear loading measurement line for static torque and its performance

Tomislav Mrčela ; University of Osijek, Faculty of Electrical Engineering, Kneza Trpimira 2B, 31000 Osijek, Croatia
Dragan Žeželj   ORCID icon orcid.org/0000-0001-5631-3928 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10000 Zagreb, Croatia
Nenad Panić ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 5, 10000 Zagreb, Croatia

Fulltext: english, pdf (293 KB) pages 37-42 downloads: 423* cite
APA 6th Edition
Mrčela, T., Žeželj, D. & Panić, N. (2009). Linear loading measurement line for static torque and its performance. Tehnički vjesnik, 16 (2), 37-42. Retrieved from https://hrcak.srce.hr/38664
MLA 8th Edition
Mrčela, Tomislav, et al. "Linear loading measurement line for static torque and its performance." Tehnički vjesnik, vol. 16, no. 2, 2009, pp. 37-42. https://hrcak.srce.hr/38664. Accessed 19 Jul. 2019.
Chicago 17th Edition
Mrčela, Tomislav, Dragan Žeželj and Nenad Panić. "Linear loading measurement line for static torque and its performance." Tehnički vjesnik 16, no. 2 (2009): 37-42. https://hrcak.srce.hr/38664
Harvard
Mrčela, T., Žeželj, D., and Panić, N. (2009). 'Linear loading measurement line for static torque and its performance', Tehnički vjesnik, 16(2), pp. 37-42. Available at: https://hrcak.srce.hr/38664 (Accessed 19 July 2019)
Vancouver
Mrčela T, Žeželj D, Panić N. Linear loading measurement line for static torque and its performance. Tehnički vjesnik [Internet]. 2009 [cited 2019 July 19];16(2):37-42. Available from: https://hrcak.srce.hr/38664
IEEE
T. Mrčela, D. Žeželj and N. Panić, "Linear loading measurement line for static torque and its performance", Tehnički vjesnik, vol.16, no. 2, pp. 37-42, 2009. [Online]. Available: https://hrcak.srce.hr/38664. [Accessed: 19 July 2019]

Abstracts
The focus of this work is aimed on enhancing the present design solution of the measurement line that would provide more accurate results and increase the speed and reliability of the recalibrating process of torque tools. Tools considered here are operated by hand, thus subjected to the performance (skill, physical strength and knowledge) of the operator. Since the pulling speed and the force are difficult to maintain or repeat by manual handling results are scattered and differ from expected values. In order to improve this process as well as fulfil compliance with international norms electrically controlled actuating device is considered. Among several analyzed solutions one with gearbox and trapezoidal spindle is chosen to be manufactured and implemented. Device testing has shown enhanced repeatability of the measurement, ease of operation and suitability for implementing automation features.

Keywords
torque; measurement; automation

Hrčak ID: 38664

URI
https://hrcak.srce.hr/38664

[croatian]

Visits: 747 *