hrcak mascot   Srce   HID

Preliminary communication

The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment

M. Łucarz

Fulltext: english, pdf (508 KB) pages 37-40 downloads: 666* cite
APA 6th Edition
Łucarz, M. (2006). The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment. Metalurgija, 45 (1), 37-40. Retrieved from https://hrcak.srce.hr/6505
MLA 8th Edition
Łucarz, M.. "The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment." Metalurgija, vol. 45, no. 1, 2006, pp. 37-40. https://hrcak.srce.hr/6505. Accessed 3 Apr. 2020.
Chicago 17th Edition
Łucarz, M.. "The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment." Metalurgija 45, no. 1 (2006): 37-40. https://hrcak.srce.hr/6505
Harvard
Łucarz, M. (2006). 'The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment', Metalurgija, 45(1), pp. 37-40. Available at: https://hrcak.srce.hr/6505 (Accessed 03 April 2020)
Vancouver
Łucarz M. The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment. Metalurgija [Internet]. 2006 [cited 2020 April 03];45(1):37-40. Available from: https://hrcak.srce.hr/6505
IEEE
M. Łucarz, "The Condition of Silica Sand Grains Surface Subjected to Reclamation Treatment", Metalurgija, vol.45, no. 1, pp. 37-40, 2006. [Online]. Available: https://hrcak.srce.hr/6505. [Accessed: 03 April 2020]

Abstracts
The results of investigations are concerned on evaluation of new silica sand grains surface condition after mechanical reclamation treatment as well as on the conditions of reclaimed sand grains surface subjected to thermal and thermo-mechanical reclamation processes. The purpose of research was to answer the question how the applied methods have influenced the surface condition of reclaimed sand grains which was tested by means of bending strength determination of sand samples prepared with resin binder and reclaimed sand. The immediate aim of the research was to explain the mechanism of impurities cleaning on the sand grains surface after thermal reclamation, when the sand is used several times in preparation of a foundry mixture, and to determine what effect these impurities may have on the technological properties of the ready sand mixture. The task of the additionally applied mechanical reclamation was to remove the accumulated inorganic compounds from the sand grains surface and confirm if further improvement of the reclaim quality is possible.

Keywords
used silica sand; thermal reclamation; mechanical reclamation; sand testing

Hrčak ID: 6505

URI
https://hrcak.srce.hr/6505

Visits: 901 *