hrcak mascot   Srce   HID

Preliminary communication

Influence of process parameters on castability at full mold casting

I. Budic
D. Novoselovic
I. Samardzic

Fulltext: english, pdf (1 MB) pages 594-596 downloads: 451* cite
APA 6th Edition
Budic, I., Novoselovic, D. & Samardzic, I. (2014). Influence of process parameters on castability at full mold casting. Metalurgija, 53 (4), 594-596. Retrieved from https://hrcak.srce.hr/122198
MLA 8th Edition
Budic, I., et al. "Influence of process parameters on castability at full mold casting." Metalurgija, vol. 53, no. 4, 2014, pp. 594-596. https://hrcak.srce.hr/122198. Accessed 25 Oct. 2021.
Chicago 17th Edition
Budic, I., D. Novoselovic and I. Samardzic. "Influence of process parameters on castability at full mold casting." Metalurgija 53, no. 4 (2014): 594-596. https://hrcak.srce.hr/122198
Harvard
Budic, I., Novoselovic, D., and Samardzic, I. (2014). 'Influence of process parameters on castability at full mold casting', Metalurgija, 53(4), pp. 594-596. Available at: https://hrcak.srce.hr/122198 (Accessed 25 October 2021)
Vancouver
Budic I, Novoselovic D, Samardzic I. Influence of process parameters on castability at full mold casting. Metalurgija [Internet]. 2014 [cited 2021 October 25];53(4):594-596. Available from: https://hrcak.srce.hr/122198
IEEE
I. Budic, D. Novoselovic and I. Samardzic, "Influence of process parameters on castability at full mold casting", Metalurgija, vol.53, no. 4, pp. 594-596, 2014. [Online]. Available: https://hrcak.srce.hr/122198. [Accessed: 25 October 2021]

Abstracts
This paper examines the effect of the temperature of pouring the melt, the density of the model of foamed polystyrene and the casting with or without a vent on castability. The testing was carried out in accordance with the experiment plan 23 i.e. during testing the value of the parameters of influence was changed at two levels: the melt pouring temperature of 640 °C and 600 °C, casting with or without a vent, and the density of foamed polystyrene model of 15 kg/m3 and 30 kg/m3.

Keywords
casting; full mold casting; castability; temperature; density of polystyrene

Hrčak ID: 122198

URI
https://hrcak.srce.hr/122198

Visits: 650 *