hrcak mascot   Srce   HID

Preliminary communication

Influence of Blasting on Mechanical Properties of Steel Sheet

M. Buršák
I. Mamuzić
M. Mihalikova

Fulltext: english, pdf (164 KB) pages 101-105 downloads: 82* cite
APA 6th Edition
Buršák, M., Mamuzić, I. & Mihalikova, M. (2004). Influence of Blasting on Mechanical Properties of Steel Sheet. Metalurgija, 43 (2), 101-105. Retrieved from https://hrcak.srce.hr/128356
MLA 8th Edition
Buršák, M., et al. "Influence of Blasting on Mechanical Properties of Steel Sheet." Metalurgija, vol. 43, no. 2, 2004, pp. 101-105. https://hrcak.srce.hr/128356. Accessed 18 Nov. 2019.
Chicago 17th Edition
Buršák, M., I. Mamuzić and M. Mihalikova. "Influence of Blasting on Mechanical Properties of Steel Sheet." Metalurgija 43, no. 2 (2004): 101-105. https://hrcak.srce.hr/128356
Harvard
Buršák, M., Mamuzić, I., and Mihalikova, M. (2004). 'Influence of Blasting on Mechanical Properties of Steel Sheet', Metalurgija, 43(2), pp. 101-105. Available at: https://hrcak.srce.hr/128356 (Accessed 18 November 2019)
Vancouver
Buršák M, Mamuzić I, Mihalikova M. Influence of Blasting on Mechanical Properties of Steel Sheet. Metalurgija [Internet]. 2004 [cited 2019 November 18];43(2):101-105. Available from: https://hrcak.srce.hr/128356
IEEE
M. Buršák, I. Mamuzić and M. Mihalikova, "Influence of Blasting on Mechanical Properties of Steel Sheet", Metalurgija, vol.43, no. 2, pp. 101-105, 2004. [Online]. Available: https://hrcak.srce.hr/128356. [Accessed: 18 November 2019]

Abstracts
The paper analyses the influence of blasting conditions on the properties of steel sheet RSt 37-2 having the gauge of 3 mm. Due to blasting, the surface roughness increases by an order and the surface strain hardening takes place to the depth of ca 0.06 mm, which results in compressive stress on the sheet surface. The above-mentioned changes, among others, increase the yield point and decrease the fatigue life in the tension-zero cycle. The increase of the yield point and the decrease of the fatigue life are more significant if the diameter of the blasting medium (within the tested interval from 0,56 to 0,9 mm) and the impact angle (30 to 75°) are greater at the air pressure of 0,4 to 0,5 MPa.

Hrčak ID: 128356

URI
https://hrcak.srce.hr/128356

[croatian]

Visits: 178 *