Izvorni znanstveni članak

Wetting phenomena of grooves at liquid metal/ceramics interface

M. Mihailović ; ITNMS, Belgrade, Serbia
A. Patarić ; ITNMS, Belgrade, Serbia
K. Raić ; Faculty of Technology and Metallurgy, Belgrade, Serbia
Z. Gulišija ; ITNMS, Belgrade, Serbia

Sažetak

The grain boundary groove (GBG) developing at the ceramic substrate under the liquid metal is evident, yet not fully explained influencing appearance in describing the wetting phenomena at liquid metal/ceramics interface. The focus here is on modeling of the phenomena at/around a groove between grains depending on grooves’ geometry. Based on atomic force microscopy results, the groove efficiency assessment is provided as a function of the transferred mass quantity and related to grooves geometry. The transferred mass quantity and, according to it, the groove efficiency at parabolic GBG is about 10 % higher comparing to the triangular GBG.

Ključne riječi

liquid metal; ceramics; interface; grain boundary grooves; wetting

Hrčak ID:

153610

URI

https://hrcak.srce.hr/153610

Datum izdavanja:

1.7.2016.

Posjeta: 1.497 *