Skoči na glavni sadržaj

Izvorni znanstveni članak

Optimization utilization of vanadium - titanium iron ore in sintering based on orthogonal method

M. Zhou ; School of Materials & Metallurgy, Northeastern University, China
T. Jiang ; School of Materials & Metallurgy, Northeastern University, China
S. T. Yang ; School of Materials & Metallurgy, Northeastern University, China
K. Ma ; School of Materials & Metallurgy, Northeastern University, China
X. X. Xue ; School of Materials & Metallurgy, Northeastern University, China
W. J. Zhang ; School of Materials & Metallurgy, Northeastern University, China


Puni tekst: engleski pdf 223 Kb

str. 581-584

preuzimanja: 913

citiraj


Sažetak

The main aim of this work was to optimize the proportions of vanadium and titanium iron ore from diverse sources in sinter mixture. Industrial V - Ti sinter was observed firstly, then 16 groups of sinter using different proportions V – Ti ore from diverse sources, designed through orthogonal method, were prepared by sinter pot, and their performances were determined. It showed that, V - Ti sinter had complex mineral compositions, particularly perovskite (CaO•TiO2). V - Ti ores from diverse sources had different impacts on V - Ti sinter properties. V - Ti sinter should be sprayed with proper CaCl2 to improving the lower reduction degradation index (RDI+3, 15). And the V - Ti sinter mixture with 5 % DaBa n (DB), 25 % HengWei (HW), 25 % YuanTong (YT), 45 % JianLong (JL) ore was optimal.

Ključne riječi

sinter; vanadium - titanium iron ore; tumbler strength; RDI; orthogonal method

Hrčak ID:

157371

URI

https://hrcak.srce.hr/157371

Datum izdavanja:

1.10.2016.

Posjeta: 1.504 *